At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
While trying to bake in my over model number FEF366DSB I keep getting the beeping and the oven keepis going back to the F30 error. On occasion I get a F10 error also. What's the fix...Donna Locher While trying to bake in my over model number FEF366DSB I keep getting the beeping and the oven keepis going back to the F30 error. On occasion I get a F10 error also. What's the fix...Donna Locher
i just bought a stove, got it delivered and there is a blinking message under the time display that reads "door Locked" and i am getting an F30 ERRR message when i hit the button to turn on the stove? Any solutions or suggestions?i just bought a stove, got it delivered and there is a blinking message under the time display that reads "door Locked" and i am getting an F30 ERRR message when i hit the button to turn on the stove? Any solutions or suggestions?
You can't post conmments that contain an email address.
Temp was too high or the sensor smoked. this happens, self clean wreaks havoc with the electronics on this stuff. need your model to tell you what the error code means
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That is an error with the temperature sensor.
Unplug the unit or turn the circuit breaker off for 60 seconds.
Restore the power to the appliance by plugging it back in or turning the circuit breaker back on. If you still have the problem here is a link to order the replacement part and a video how to replace the part which is fairly easy to do.
Hey Kimberly, thank you for your inquiry!
I understand that the door on your Frigidaire range is locked and it will not start a self-clean cycle, it is also displaying an error code of "F91". The "F91" error code means that the door has exceeded maximum oven door unlock time. This means you could be experiencing an issue with your door latch, control panel, or a miscommunication within the range. To clear out a miscommunication within your range you need to disconnect power from it for at least ten minutes. I hope that this information is helpful to you. -Matt
Hi - Typically error code F30 for Frigidaire range indicates an issue with the sensor probe or the wiring harness between sensor probe and EOC.Try resetting the unit and see if the error code will clear. You can either unplug the unit or flip the household circuit breaker off. Wait approximately ten minutes and turn on the range. If issue continues, contact a professional to move forward accurately
Hi here is the meaning of the F30 error code. If you have any other questions please feel free to comment. Mike
F30 F31 Open probe connection. Shorted Probe connection. 1. (F30 or F31) Check resistance at room temperature & compare to *RTD Sensor resistance chart. If resistance does not match the RTD chart replace RTD Sensor Probe. Check Sensor wiring harness between EOC & Sensor Probe connector. 2. (F30 or F31) Check resistance at room temperature, if less than 500 ohms, replace *RTD Sensor Probe. Check for shorted Sensor Probe harness between EOC & Probe connector.
I had the same F30 error problem but fixed it. On my professional series Frigidaire, there are 2 resettable red button locations. I discovered that only one is in the rear of the oven. After going to the breaker box and shutting off the power, pull out the stove enough to work, unscrew the rear screws (I didn't unscrew all of them, just enough to work back there). The small red button is on a small black round piece with two purple wires feeding to it. That was not my problem. Mine was the other red button behind the control panel. Pull off all 4 knobs, unscrew by hand the large black rings that are underneath the knobs, pull out the whole panel. Look back and right (below where the right knobs were located) to find the 2nd red small button. Push to reset. Check this one first since it is easier to do.
While trying to bake in my over model number FEF366DSB I keep getting the beeping and the oven keepis going back to the F30 error. On occasion I get a F10 error also. What's the fix...Donna Locher
i just bought a stove, got it delivered and there is a blinking message under the time display that reads "door Locked" and i am getting an F30 ERRR message when i hit the button to turn on the stove? Any solutions or suggestions?
×