Cutting out when the vacuum is upright it is cutting out with what seems like close conection. any thoughts?

Question 1

1helpful

1answer

We have a VAX 1850w turbo force xtra. It was cutting out, so we've stripped the whole thing right back, & cleaned it thoroughly.

Check for blockages causing motor to overheat

Nov 27, 2016 • VAX Appliances Vax X3 Bagless Upright...

0helpful

1answer

Cutting out during use

that means you have blockage in one of the pipes normally the one under the vac were the brush-bar is

Jan 25, 2013 • Dyson DC07 Animal Bagless Upright Cyclonic...

0helpful

1answer

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not...

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not jammed. Seems like a loose connection somewhere but where ? and what

Jun 29, 2011 • Dyson DC15 All Floors - The Ball Bagless...

0helpful

1answer

I lost my instruction book how to take filters a part and it wont pick up so i need the instruction book. could you please send me the book. thank you.

This URL provides an exploded view of the unit, I will continue to search to see if I can find a free owners manual. This shows a BVZ as opposed to a AVZ, but I thought it would be close enough to be of help to you.

Paul
http://www.vacpartswarehouse.com/Eureka-2961BVZ-Bagless-Upright-s/1848.htm

Oct 06, 2010 • Eureka 2961AVZ Bagless Upright Vacuum

0helpful

1answer

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY...

Check the roller ends for dirt build up, they pull off and you should be able to clean them out. The roller should just go back into place if pushed together.

Oct 04, 2010 • Dyson DC17 Animal Bagless Upright Cyclonic...

0helpful

1answer

Brush stops spinning at slightest touch

Check both belts

Mar 31, 2010 • Dyson DC07 Animal Bagless Upright Cyclonic...

0helpful

1answer

Dyson DC07 keeps cutting out and smells of

does it smell like an electrical burning smell? sounds like your motor has went bad.

Mar 06, 2010 • Dyson DC07 Animal Bagless Upright Cyclonic...

1helpful

1answer

The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I've tried all the settings...

Sounds like there is a clog..

Usually its in the hose - look closely.. Stretch the hose out straight and look in there good..

Or a clog could be in the vac close to where the hose conects to the vac on either end..

This is most case scenario with these types of vacs..

I hope this helps !!
Please rate me good ;o)

Jul 10, 2009 • Hoover U5269910 Bagless Upright Vacuum

5helpful

1answer

Just stopped mid hoovering and now won't switch on!

It is probably a thermal cut-off which is caused by a blockage. The machine will turn itself off before it overheats if it is a thermal cut-off. Once it has cooled down, you will be able to turn it back on again (usually 30 mins - 1 hour).

If the machine doesn't turn on at all anymore, you may need to replace the power switch. Call the Dyson helpline, they will do a blockage troubleshoot and if it's not that, they will tell you where you can find an authorized Dyson repair dealer in your area.

Jul 07, 2009 • Dyson DC07 Bagless Upright Cyclonic Vacuum

0helpful

2answers

G6 cutting out

Hi There, If it keeps cutting out when you move the handle it's usually the cable that has gone. Turn the machine on and waggle the cable if it cuts in and out then you can confirm it's the cable. Many Thanks Chris www.elidistribution.co.uk

Sep 14, 2007 • Kirby G6 Bagged Upright Vacuum

Question 2

Anonymous

Master 438 Answers
Posted on Oct 03, 2008

Anonymous

Master

Joined: Sep 25, 2008

Answers

438

Questions

4

Helped

477634

Points

2625

Greetings from Govacuum,

You may want to check the handle position. On the base of the handle there is a little tab (see picture below) that has open one side, closed on the other. If for some reason the handle is not completely down, this can cause the machine to cut on and off. Just unlock this tab, push the handle all the way down, and then close the tab again. Hopefully this should take care of it for you.
cutting out - d128cfb.jpg

If you have any other questions about the Sebo, I love sharing my knowledge, and passion for fixing and repairing vacuums, please don't hesitate to send me an email.

Answer 2

Freddie Flossie

Contributor 1 Answer
Posted on Nov 29, 2015

Freddie Flossie

Contributor

Joined: Nov 29, 2015

Answers

1

Questions

0

Helped

345

Points

1

Wow that worked for me

Related Topics:

Trustworthy Expert Solutions

Cutting out when the vacuum is upright it is cutting out with what seems like close conection. any thoughts?

2 Answers

Anonymous

Freddie Flossie

Add Your Answer

Attachments: Added items

Related Questions:

We have a VAX 1850w turbo force xtra. It was cutting out, so we've stripped the whole thing right back, & cleaned it thoroughly.

Cutting out during use

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not...

I lost my instruction book how to take filters a part and it wont pick up so i need the instruction book. could you please send me the book. thank you.

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY...

Brush stops spinning at slightest touch

Dyson DC07 keeps cutting out and smells of

The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I've tried all the settings...

Just stopped mid hoovering and now won't switch on!

G6 cutting out

Not finding what you are looking for?

X4 Bagged Upright Vacuum

We have a VAX 1850w turbo force xtra. It was cutting out, so we've stripped the whole thing right back, & cleaned it thoroughly.

Ask a Question

Check out the Latest Vacuums Report

Top Sebo Vacuums Experts

Brad Brown

Paul Bade

ADMIN Andrew

Are you a Sebo Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Cutting out when the vacuum is upright it is cutting out with what seems like close conection. any thoughts?

2 Answers

Anonymous

Freddie Flossie

Add Your Answer

Attachments: Added items

Related Questions:

We have a VAX 1850w turbo force xtra. It was cutting out, so we've stripped the whole thing right back, & cleaned it thoroughly.

Cutting out during use

DC15 Brushbar Problem. Intermittant operation of brushbar. Cuts out depending on angle of vacuum. Also cuts out on lifting from floor. Normal suction at all points and no blockage. Brushbar not...

I lost my instruction book how to take filters a part and it wont pick up so i need the instruction book. could you please send me the book. thank you.

I cut all of the hair out of the bottom of the spin-brush on the Dyson Upright Animal Vacuum. Now I dont think I can get the brush back in there correctly. If I squeeze it in there (which it is a VERY...

Brush stops spinning at slightest touch

Dyson DC07 keeps cutting out and smells of

The vacuum cleaner does not pick up anything from carpet. It does not even pick up pieces of thread laying on carpet. On tile floors it blows dirt away instead of picking it up. I've tried all the settings...

Just stopped mid hoovering and now won't switch on!

G6 cutting out

Not finding what you are looking for?

X4 Bagged Upright Vacuum

We have a VAX 1850w turbo force xtra. It was cutting out, so we've stripped the whole thing right back, & cleaned it thoroughly.

Related Topics

Ask a Question

Popular Questions

How do I fit the foot pedal back on on a SEBO

Bag showing as full when a new bag is in and all hoses unblocked

Brush not working on sebo felix

Why won't my Sebo Felix premium brush head won't turn? Vacuum works otherwise, but the power head won't work.

A picture of how to replace foot pedal

Check out the Latest Vacuums Report

Top Sebo Vacuums Experts

Brad Brown

Paul Bade

ADMIN Andrew

Are you a Sebo Vacuum Expert? Answer questions, earn points and help others

Manuals & User Guides