At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
get a SONY universal remote number RM-U302 it needs no codes just press the SONY item say in your case TV and the remote will self calibrate to your type
The original remote control number to this set is {RM - Y198}. If you buy its original one, contact the nearest authorized service center for Sony. The universal remote control codes for Sony Brand Tvs are: 0128 0013 0002 0071 0380 If you wish to buy a universal remote control, check whether there is these codes with its code list. The code list will be attached with every universal remote control pack. Make sure there are these codes with it. In my opinion, it will be best to buy its original one. Original is Original, and Universal is Universal!!
I'm not being a smart alec here just helping...buy a Sony universal remote. Maybe $8 or $10. You won't have to keep programming the code when the batteries die or get taken out. As soon as you install the batteries, the unit will operate any Sony tv. If you want to use the unversal remote you have you need to tell us the brand of the universal remote you are trying to use. Good luck!
If you want to test the voltage you can do so at connector CN002 on the main board. You should have 5 volts DC at pin 4 and at pin 5 marked SIRCS (sony infared remote control system)should be 5 volts as well but, will drop to about 2.5 volts when any button is pressed on the remote. If it doesn't change then you should change the HR board wich houses the IR rec. and associated components.
thank you
×