Dish washer won't start

perhaps you have activated a delay start button...

Unplug,then plug up,may reset.

Hello, zz

I was trying to help you out here. I am not sure if this well help you? But here is a link to about everything you want to know about your dishwasher, from repair to trouble shooting on most common dishwashers. If you go to this link and click around, I am sure you will find out so much about your Dishwasher, you will know more that the company that made it.If you already solved the problem this is good for future problems. Here Is the link for you to click on.

http://home.howstuffworks.com/dishwasher.htm

Please if this helps you at all, and if you can find the time to rate my help and some kind words written would be appreciated for my free help. Here is also my direct link to my own pages of other areas of my expertise for other problems you might have in Automotive,Appliance, and Electronics. Drop In anytime for my help. Thanks So Much, Mike :)

http://beta.fixya.com/users/mc1bean

Itcould be something caught in the impeller or filter area

hello hmm ok so no lights it sounds like your control panel after unplugging your dish washer check the panel for loose wires the panel is the part behind were your buttons are located will have to remove your back cover to access this if that's all good then try your power cord again make sure its not got any loose wires were it attaches into the dish washer have a nice day and good luck let me know if you find anything.

usually it is the water level control switch which can be found at the link i provided for you http://www.appliancepartspros.com/repair-help/maytag-dishwasher-wu304-repair/wu304-will-not-drain.html

There is a small round item in dishwasher on front bottom, if it is pulled up all the way the dishwasher will not allow water in.

I suggest calling Maytag and have a tech come out to look at it. Appliances come with a one year parts and labor warranty.Use it before your one year is up.

i need your serial num its important 17