Yes, Could you please help me? I'm having problems with connecting my bluetooth.It tells me to add new device and i lost my instructions.

what did you buy in 2008? information you've provided is as ambiguous as asking which clothes do I presently have on; can you tell?
pairing has to do with bluetooth devices, NFC devices, etc.
to pair a bluetooth device simply navigate to connections or applications or tools on your device. locate bluetooth link and select either power this on or locate the make discoverable link and select yes. attempt to pair with other bluetooth devices around.
Another option to try is to select add device. if any passcode or authentication is required accept and/or pair.

"First, turn on Bluetooth and Bluetooth visibility in your phone. This makes your phone visible to other Bluetooth devices.

Headset instructions:

1. Make sure that the headset is fully charged, turned off and within 1 m (3 ft) of the phone.
2. Press and hold the On/Off button for at least five seconds, until you hear along high frequent beep and the light flashes red and green.
3. The headset is now in pairing mode.
4. If your phone supports auto pairing, press Yes when the question "Add device?" appears in your phone. If not, continue with the next step.
5. Prepare your phone according to the phone instructions on how to add a Bluetooth device. Please note that for some phones you may need to enter a passcode. The headset passcode is 0000.

Phone instructions (NB: these may differ a little depending on phone model. For exact instructions, see Pairing instructions for the specific headset and phone model on www.sonyericsson.com/support.):

1. Enter the main menu and go to Settings, then select the Connectivity tab.
2. Select Bluetooth > My devices.
3. When New device appears, press ""Add"".
4. The phone starts searching for devices. Make sure that the headset is in pairing mode.
5. When the headset becomes visible in the Devices found menu, highlight it and press ""Select"".
6. Enter the Passkey (0000 by default) and press ""OK"".

The headset is now added to the list of paired devices and is ready to use."

Hi friends

Do you want to CONFIGURE BLUETOOTH WITH COMPUTER ?

It s a simply way, to solve the problem.you will follow the instruction.
Follow the bellow step.

1. just enter your Bluetooth in your pc.
2. when the icon show your task menu bar just
3. double click on icon
4. add>check on my device >next(ensure phone Turn BT on )

http://www.acroname.com/garcia/tutorials/bluetooth/connection/connection.html

you can see the phone model which Bluetooth on.
just select the device >choice any ask code >I will advice you, please select, let me choice> type any 8 digit >next >now the same

number > in your mobile >finish

For dial up go r click on my network>properties>create a new connection> connect to internet>next >set up manually>connect

using dialup>select your mobile modem>next >type any name >type the exact name and number eg: for Airtel=*99#>next >no user

name and password just next >check on add short cut>and finish.
Just double click on the icon, it will connect soon.
Or
you can install PC suit and set it through the following step.
Setting> Setting >participate tic on yes .Double click on phone icon >next>tic on Bluetooth connection >next >select yes the phone

mobile>next
Remember always set the mobile for connection select the yes.
Hope it will help you.

Hello,

You can connect Nokia 2690 using bluetooth and using Nokia connectivity Cable CA-101 which will fit to the USB port of your laptop.

(NOKIA connectivity cable)

Procedure on how to connect:

1. Bluetooth (This will work with the laptop with bluetooth)

First, remember to turn on the Bluetooth feature and make it discoverable by other devices (My Phone's visibility -> Shown to all) on cell phone, so that it can be detected by laptop.

Then, click on the add devices in the control panel of your computer. Click start> control panel

2. Add Bluetooth Device Wizard window will appear, tick My devices is set up and ready to be found and click Next.



3. The wizard will then search the Bluetooth devices nearby, and will show the found devices. Here the wizard found my cell phone named David. Click the device you want to add, after that click Next.



4. Ok. Here the wizard will ask whether you need a passkey to add your device, so that the communication data between laptop and cell phone will be encrypted later, here I would recommend you to either select Choose a passkey for me or Let me choose my own key. In this example, I select choose a passkey for me.



The wizard will then show the passkey and you need to key in to your cell phone. After that, the laptop will try to install the Bluetooth device. If you have Bluetooth program for your cell phone, you can install it as Windows Vista might have problem to install the device . For my case, I install Nokia PC Suite on the laptop, so I can transfer wallpapers and videos later.

Note: Also your cell phone will get the prompt to accept connection from laptop, and you need to click yes.


5. At last, click Finish to complete the Add Bluetooth Device Wizard.


6. And now, you will see the new bluetooth device added which is your Nokia 2690 phone.


Here's another way on how to connect your cellphone to your laptop.

2. Hard Connection using Nokia connectivity Cable CA-101

You can get this from any nokia stores.

Procedure:

Just connect the other end of the wire to your cellphone and the other end to the usb port in your laptop. Follow the onscreen instructions in your cellphone.

Check your laptop if your cellphone has been detected, once it's connected you can then access your pictures or other files in your cellphone. You can even transfer files.

I hope this helps.

Please rate this solution. Don't forget to leave your comments/suggestions on how I can improve my service.

Thanks..

Hi friends
It s a simply way, to solve the problem.you will follow the instruction.
Follow the bellow step.

1. just enter your Bluetooth in your pc.
2. when the icon show your task menu bar just
3. double click on icon
4. add>check on my device >next(ensure phone Turn BT on )

http://www.acroname.com/garcia/tutorials/bluetooth/connection/connection.html

you can see the phone model which Bluetooth on.
just select the device >choice any ask code >I will advice you, please select, let me choice> type any 8 digit >next >now the same

number > in your mobile >finish

For dial up go r click on my network>properties>create a new connection> connect to internet>next >set up manually>connect

using dialup>select your mobile modem>next >type any name >type the exact name and number eg: for Airtel=*99#>next >no user

name and password just next >check on add short cut>and finish.
Just double click on the icon, it will connect soon.
Or
you can install PC suit and set it through the following step.
Setting> Setting >participate tic on yes .Double click on phone icon >next>tic on Bluetooth connection >next >select yes the phone

mobile>next
Remember always set the mobile for connection select the yes.
Hope it will help you.

Hello,
It means you mobile did not find any blue tooth device ,
So please, switch on your another device to whome you want to connect.


I am giving you an example to set the blutooth.
It s a simply way, to solve the problem.you will follow the instruction.
Follow the bellow step.

1. just enter your Bluetooth in your pc.
2. when the icon show your task menu bar just
3. double click on icon
4. add>check on my device >next(ensure phone Turn BT on )

http://www.acroname.com/garcia/tutorials/bluetooth/connection/connection.html

you can see the phone model which Bluetooth on.
just select the device >choice any ask code >I will advice you, please select, let me choice> type any 8 digit >next >now the same

number > in your mobile >finish

For dial up go r click on my network>properties>create a new connection> connect to internet>next >set up manually>connect

using dialup>select your mobile modem>next >type any name >type the exact name and number eg: for Airtel=*99#>next >no user

name and password just next >check on add short cut>and finish.
Just double click on the icon, it will connect soon.
Or
you can install PC suit and set it through the following step.
Setting> Setting >participate tic on yes .Double click on phone icon >next>tic on Bluetooth connection >next >select yes the phone

mobile>next
Remember always set the mobile for connection select the yes.
Hope it will help you.

Hello,
If you use windows XP or VISTA OR Windows 7 no need to driver for blue tooth configure.

Only the driver need for 98.
Follow the instruction with the link
http://www.acroname.com/garcia/tutorials/bluetooth/connection/connection.html#e2

Windows XP Bluetooth Device Setup
Windows XP comes with a Bluetooth configuration utility that you can use to help define a new device that we can connect to. We will use this utility to set up a virtual serial port that we can use to communicate with the Bluetooth enabled Garcia.
This configuration utility can be found under the Windows Control Panel, then launch the Bluetooth Devices application.
Click the "Add" button to begin configuring the virtual serial link as shown in the following image
1. just enter your Bluetooth in your pc.
2. when the icon show your task menu bar just
3. double click on icon
4. add>check on my device >next(ensure phone Turn BT on )

http://www.acroname.com/garcia/tutorials/bluetooth/connection/connection.html

you can see the phone model which Bluetooth on.
just select the device >choice any ask code >I will advice you, please select, let me choice> type any 8 digit >next >now the same number > in your mobile >finish

For dial up go r click on my network>properties>create a new connection> connect to internet>next >set up manually>connect using dialup>select your mobile modem>next >type any name >type the exact name and number eg: for Airtel=*99#>next >no user name and password just next >check on add short cut>and finish.
Just double click on the icon, it will connect soon.
Or
you can install PC suit and set it through the following step.
Setting> Setting >participate tic on yes .Double click on phone icon >next>tic on Bluetooth connection >next >select yes the phone mobile>next
Remember always set the mobile for connection select the yes.
Hope it will help you.
Regards
Shibuda

Hello my friend,do these steps

Pairing with another Bluetooth device

By pairing your KU990 and another device,
you can set up a passcode protected
connection. This means your pairing is
more secure.
1 Check your Bluetooth is On and Visible.
You can change your visibility in the
Settings menu.
2 Touch Paired Devices then New.
3 Your KU990 will search for devices.
When the search is completed Refresh
and Add will appear on screen.
4 Choose the device you want to pair with
and enter the passcode then touch OK.
5 Your phone will then connect to the other
device, on which you should enter the
same passcode.
6 You passcode protected Bluetooth
connection is now ready.

Using a Bluetooth headset
1 Check your Bluetooth is On and Visible.
2 Follow the instructions that came with your
headset to place your headset in pairing
mode and pair your devices.
3 Touch Yes to Connect now. Your KU990
will automatically switch to Headset profile.



If you have any questions you can try reading the manual here
http://www.in.lge.com/Product/Manual/KU990.pdf

Found this at another site. It worked for me. Good luck!!


Back to the phone, you want to hit "add new device". On certain models of phone you additionally have to select "search for devices". Your phone will recognize any headsets in pairing mode. When it is finished scanning, allow the phone to add your headset. It will ask you for the device pin code. This pin code will be 0000.

you have to first put bluetooth headset in pairing mode by holding the phone hook button down until blue indicator on headset goes solid blue not flashing then set your phone to find bluetooth device by looking under your phones menu and look under bluetooth or connections make sure to turn on bluetooth function and choose find or add device phone will detect bluetooth device and will display the type of device on your phones display tell it to bond or connect once you select yes thats it the bluetooth headset will start to flash and its ready to go.