Operating temperature Navman icn

Write to me: [email protected] I will try to help you make it work

memmory full delete some data

I have a ICN 320 Navman and it took 20 to 30 mins to connect to Satalites that is untill yesterday morning when I Updated the Navman Satalite GPS Data if U wish to know what I did please contact me on [email protected]
My ICN 320 now takes a few seconds to conect to Satalite systems/
Regards
Ken

Try hitting your reset button if you haven't already. I had the same problem and this worked for me.

I had this problem when I completely deleted the Backup folder from \My Flash Disk.

Restoring the backup folder allowed the 520 to operate properly again.

It is possible that you have a corrupted APPStartupSec.exe application. Without this file working it appears that the NAVMAN waits in USB mode for ever!

Hope this helps.

There are two possibilities:

1) it is a software problem, in this case you can solve it downloading and installing a firmware update. You can download latest software from here.
This is most likely situation.


2) If the above did not work it means that you have an hardware problem, probably the touchscreen is slightly faulty, or the lcd ribbon cable is not well connected. In this case I suggest to take the navman to service.

Regards

The CD is not available for download from Navman it seems, but you can get it at thepiratebay.com. Just search for 'navman icn' and you'll find what you need, I just did. Better learn how to download torrents though! :)

I have a 310 and purchased an SD card for France from Navman, it says it works in the 310/320/330 so my guess is that a 320 map will work in a 330.

is there any indication that the volume control still works?

carefully pull off front grey cover with your thumb, next to card socket, underneath are 4 security screws you need a small torque head screwdriver, take off cover losen security screws inside around battery, unplug and remove battery, replace in reverse.