Why does my chrysler grand voyager keep creeking when going over bumps

google stainless steel maple creek edition Callaway golf watch value.
It will determined by how much someone is willing to spend, not your asking price.

turn hands clockwise untill date changes than back up about half an hour and go forward again some let you bump one day at a time faster that way, some just require turning the stem counter clockwise when pulled out.

Are there any guides for novice tourists? This is my first time traveling abroad alone and I'm still a little nervous. I'd be glad for your advice.

Just about any watch shop should be able to fix your watch, no need to go anywhere special, but if you need a place to mail too.  Here are a couple of choices for you. 

 

Citizen Watch Repair
Dallas Service Center
800 E. Campbell Road
Suite 371
Richardson, TX 75081
(972) 234-4900(tel)
(972) 234-4901(fax)

Time-Tec Watch Svc
635 S. Hill Street
Suite 209
Los Angeles, CA 90014
(213) 488-9222 (tel)
(213) 488-9221(fax)
(888) 448-TIME (toll free)
www.Time-Tec.com

 

Eastside Watch Repair
E.S.W
P.O Box 8004
Mill Creek,WA 98082
(425) 641-7978

If your watch is "automatic" then would I be right in thinking you took it off for a few days and it stopped?

If this is the case (since most of the Carrera range are automatic, then the spring will have run down and needs re-winding.

You were correct in thinking that shaking it will re- start it but to keep it going you need to shake it gently from side to side for some time. (One supplier quoted 500 times!) be patient and keep wearing it.

I guess you never overhauled your watch.Every mechanism has it's limits - so does the watch movements. Your watch has ETA Swiss made mechanical movement which is very good and reliable, but you have to take care of it from time to time. Mechanical movements are designed to last almost forever if they are looked after and yours isn't an exception. Bring it down to the local watchmaker and ask to overhaul it. It will run as new again and will not let you down. It is recommended to overhaul mechanical watches every 4-6 years. If this will be done, your watch will happily tick-tock on your grand-grand-grand-grand-grand-grand children's wrist and they will remember you with a few good words and respect.

Use the button, that you use to go to the hours setting and keep pressing it, until the minutes flash. Bump the plus or minus button until you have the correct time. Bump your way through to regular running time.

Are you aware that these are automatic watches and need to be moved to keep the watch going, kinetic energy winds up the movement which allows it to keep going, if it is left off your wrist and in a drawer or sat stationary it will stop. Shake it violently (without dropping it) and it will restart.

good after noon ! the hand of your watch is need to aline , so you need to go to the watc repairman,thank you! god bless !

Yes, you must unscrew the crown before you wind up or set the watch. Always screw the crown down afterwards this keeps the watch in a water resistant condition.