My chronograph men's watch came without a manual. Where do I find a manual that discusses setting time, cleaning the watch, setting teh date, etc?

View the instruction manuals - Invicta

invictawatch.com/service/view-the-instruction-manuals

Enter your 4 or 5 digit model number to locate your watch. RECEIVE THE NEWSLETTER SOCIAL MEDIA · Terms & Conditions Customer Service Service ...Missing: 12983 ‎subdial

Setting Time Date Invicta Watch Chronograph - SmartBargains

https://www.smartbargains.com/.../Setting-Invicta-Chronograph.html

Know how to set time, day, and date in the Invicta Watch Chronograph. ... Invicta sells several different kinds of chronograph watches, with the two main ... and the Invicta Big Date and Day chronograph - the subdials that measure seconds and ...Missing: 12983

Invicta Reserve 48mm Octane Swiss Made Quartz ...

How do i set time for Kenneth Cole Reaction New York Digital Chronograph Men's Watch # KC1170

You have to hold down B to set up T1 which is the time the hands will display. Once you see the City and T1 show up on the digital display you can go through the various settings to set time/date etc. Use B to cycle through setup and A to make the necessary changes.

Pushing the crown allows you to set up T2 or the time displayed on the digital section. You set this by choosing the time zone.

Hope this helps

there two position to pull crown out
position 1 -- to change date
position 2 -- to change time

bring crown to position 1 and turn counterclockwise to set date on your watch.

Need a clear size manual to set the chronograph watch time

Copy the following into your search engine and it should take you to the watch you have and on the right is a menu which includes "user manual" which will give you all the information you need.
www.tagheuer.com/the-collection/carrera/men/automatic-chronograph-tachymetre/index.lbl?w=CV2013.FC6206

hello
i have hour nautica ... number A29506.. i wants to change date ... please tell me how to chenge .. maybe you write in my e-mail
[email protected]
tthenks..

The Lupah has a chronograph so dont worry about the sub dials while your setting the time. Pull the crown out to the first position and set the time. For the date pull out to the second position and set the date.

To set the chronograph sweep arm pull the crown out and press and hold down the start button. The sweep arm will move into position. Stop it on the 12:00 or 0 position.

See page 26.
http://www.invictawatch.com/support_files/instruction_manual/Manual-HiRes.pdf

The three buttons are the Chronograph start button (top), Crown (middle), and chronograph reset (bottom).
To set the watch pull the crown out to the first position and turn it until it is on the right time.
To set the date pull the crown out to the second position and rotate until you have the right date.
Be sure that when you set the time that you are in the right AM or PM. DO this by watching when the date turns at the 12:00 position. The date changes at midnight so that would be AM.