My new treadclimber 5000 does not accurately record steps taken, though it does show mileage. How do I get it to record steps taken?

Hi.

Please click on the link to view how to calibrate the treadmill.


https://www.manualsdir.com/manuals/58333/bowflex-treadclimber-5000-treadclimber-3000-treadclimber-1000.html?page=33


Kind regards.

Neither one could be accurate. You are probably somewhere in between.

Bowflex Treadclimber Shuts down - Questions - Fixya

www.fixya.com > Forum > Treadmills > Bowflex > Bowflex Treadclimber

Bowflex Treadclimber, shuts down related issues. ... After a few times of shutting down due to the heat. Ad ... It shuts down about 60 seconds after it starts.

Customer Reviews: Bowflex TC3000 Treadclimber

www.amazon.com/Bowflex...Treadclimber/.../B000B...

Amazon.com, Inc.The second time I used it I slowed down the speed and worked on getting the ... After researching the TreadClimber for over a year (the cost was a big factor .... We were never able to make the treadles go up and down more that a few inches. ..... a great workout However it continually shut offs while working out and Bowflex ...

Comments for Bowflex TreadClimber Problems

www.treadmilltalk.com/bowflex-treadclimber-user-comments-comments....

Oct 30, 2013 - NOTE: My comment about Bowflex Treadclimbers is also one I left in another area. ... seems like no one sprung the extra few bucks to pay for someone to put the ... In my case , after the initial startup, the machine stops EVERY time at ...nearly spine snapping shutdown at exactly 32 minutes after starting. 5.

[PDF]Bowflex® TreadClimber® 1000, 3000 & 5000 - Nautilus

download.dfxi.com/.../SM/Bowflex/BFX_TC135_SM_RevA_web.pdf

Try to run the treadmill @ 10kph. W/o using it. If the problem comes up. The problem is only the speed sensor..
and if the treadmill is in normal condition with out someone using it. @ 10kph. The problem is only lack of lubrication. You need to lubricate the treadmill before you using it. To prevent the motor from breakdown.

I have one when you step on it, it should turn on.

Bowflex has a service manual for the TC10 that includes walking belt replacement instructions, If you call customer service they should be able to email the whole manual or just the belt replacement steps.

see the video and proceed according and fix it. God bless you

Recalibrate the machine if speed is not registering, belts stop turning or the display readout shows an "err, LS, OS" on the face. Calibrate the Bowflex TreadClimber 5300 by plugging it in. Stand on the foot platforms, or floor mat. Do not stand on the walking belt. Insert the safety key. Press the "start" key when "CAL/PRSS/STRT" shows on the readout. If readout fails to show the "CAL/PRSS/STRT" symbol, turn off machine and turn it back on. Press "ENTER" and then "DOWN SPEED" at the same time until "CAL/PRSS/STRT" shows up on the display. Belts will start and stop during the calibration; do not be alarmed. Do not make any adjustments or interrupt the display of numbers as the unit goes through the calibrations. When the machine is finished calibrating, the readout will display "CAL...PASS" and you can press the "POWER" key to get out of the calibration section
sincerely.

You'll need inspect the movable areas of your unit by hand something may have come loose or see if their is any excessive lateral play could be worn or cracked bushings. Have some else help you by stepping off on either side to see where the sound more prominent. Unfortunately it a process of elimination good luck!

I had this happen on our machine after about 5 years of use. I just recalibrated it and it appears to be working fine now. See the manual for information on the steps needed to take in order to do this.