Re: I want to replace my Pontiac G6 radio. But I want to...
There is a kit from Metra called the Metra 99-3303 kit that takes the double din area of the stock stereo and converts it into an info center/single din. Cost is about $123 on ebay.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Go to the dealership with your registration document and they wil give it to you for free, or phone here
How do you unlock a radio in a 2007 Pontiac g6? Dial 1-800-537-5140 to connect with GM's toll-free radio hotline. Once you're connected, you'll be asked to provide your vehicle's radio identification number, along with a special dealer access code. You'll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.
Turn on your radio and see if it displays CODE or LOC. If it does, turn off the radio. Press and hold down the audio power button together with the SEEK button for about 50-60 minutes. Then, it will turn on without entering the radio code.
Jun. 9, 2021
The tiny display bulb is burned out, you must remove the radio and have the bulb replaced, it is soldered to the circuit board and it takes special tools and skill to replace it.
did you hook the cables up backwards (ground to positive) as this could short out your electronics. are there any other electronic issues. if you didnt and everything else is ok you radio may have an anti-theft program. you can try disconnecting the ground connection to the battery for about 30 secs and reconnecting it. if it still doesnt work look in your owners manual how to reset the computer also check your fuses.. if all fails you may need to get the radio reprogrammed good luck
continually press/release the center of the tuning know until you have the preferred display you want and then press and hold the same button until the system beeps (1-2 seconds). It will now save your preferred default screen (clock in your case)
Thats because on the G6 your entire control center and brain of your car is ran through your radio. Without the fuse to your radio, there is no current getting to the controllers for the G6's quick click auto start feature. The G6 does not use a regular starter cylinoid like most cars older than 2004-2005. The controlling signal of starting your car when you click your key over for that split second is run through systems housed and integrated in the radio.
×