SOURCE: rca remote, codes don't work for sylvania tv
Trata con esto.
Presiona el boton Code search y mantanlo asi hasta que el led se quede encendido suelta y presiona el boton TV despues vas a presionar y soltar el boton Power hasta que el televisor se apague despues presionas el boton enter y el codigo queda almacenado.
El Tv tiene que encenderse primero manualmente.
SOURCE: philips universal remote - tv codes for Sylvania
Only one code worked (out of the 13 codes provided for Sylvania TVs
with my Philips Universal Remote) so I could program my Philips
Universal Remote to operate my Sylvania 6413TC 13" TV: 0520
After manually turning on the TV:
1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.
2. Press and release the desired Mode button (in your case -
TV). The red indicator blinks (very quickly), then stays lit.
3. Enter the 4-digit code (0520), and if it's valid, the red
indicator should turn off. (Supposedly, for an invalid code, the
red indicator flashes. However, when I tried all 13 codes, the
red indicator turned off, yet only one code actually worked. Go
figure.)
4. Press CHANNEL UP. If your TV responds, no further
programming is required. Although, some buttons on your Universal
Remote may not operate your TV. (They all worked for me, yeah!)
If 0520 does not work for you, here are all the codes provided by
Philips: 0807, 0002, 0502, 0115, 0520, 0919, 0324, 0247, 0402,
0408, 0109, 0715, 0717.
Good luck!
SOURCE: philips universal remote - tv codes for Sylvania
Several people in the on-line forums suggested inputting the brand search codes for Philips and Magnavox sets -- but it didn't work for me. Someone else suggested that Funai Corp (China) now makes some Sylvania sets, and their rep said that universal remotes don't work for their products. My Philips Universal Remote says to enter "0" for the brand search code, and that will instruct it search for all the codes installed in it. But there are approximately 300, so be very patient. And it didn't work for me anyway. . . but maybe it will for you.
If you do find an answer/solution, pl post it, OK? Thanks.
Donna
SOURCE: cant program my universal remote
Search the model # of the REMOTE on www.google.com and a good portion of the manufactures have the Codes on thier sites for you.
248 views
Usually answered in minutes!
×