HOW DO I ACCESS MY MESSAGES FROM A REMOTE LOCATION

it's called remote operation. Press "MENU", then "number sign" and enter a 3-digit code of your choosing. Press "SAVE" and then "OFF" When you away from home, dial your phone number and after the greeting message starts, enter your 3-digit remote access code.

The remote access section is on page 18 of the manual at
http://www.home-electronics.net/ge/pc/IB/29875GE1_IB.pdf

The remote access instructions begin on page 35 of this manual.

The remote access instructions are on page 18 of the manual at
http://www.home-electronics.net/ge/pc/IB/29875GE1_IB.pdf

Since you neglected to specify the model of your Uniden DECT 6.0 phone I can only suggest you select it from the list beginning here to download a copy of the manual and the remote access instructions.

Since you neglected to specify the model of your Uniden cordless system I can only suggest you select it from the list beginning here to download a copy of the manual and the remote access instructions.

Press 0 followed by the code

CLICK HERE for the user manual.

The following is on Page 19....

REMOTE ACCESS
You can access your answerer from any touch-tone phone
by entering your 4-digit security code (the default security
code is 0123). The remote functions do not work with rotary
or push-button pulse-dialing phones. You can cut out the
wallet-size remote card near the back of the User’s Guide
so you know the touch-tone commands when you're
picking up messages from another location.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting,
enter your 4-digit security code. To bypass the
greeting, you can enter your 4-digit security code at
any time while the greeting is playing.
3. The unit plays the remote menu after the correct
security code has been entered. Menu selections can
be made at any time while the menu is playing.

NOTE: The unit answers on the 10th ring when it is
turned off or the memory is full. To access the
answerer, enter the 4-digit security code after the
beep. If memory is full, play messages and erase
some of them to restore memory. If the answerer is
off, press 2 to turn it on.
NOTE: After the unit plays the remote menu, it will
wait several seconds for a command, then disconnect


Thank you for using Fixya - a FixYa rating is appreciated!!

Manual - http://support.radioshack.com/support_phones/doc65/65505.pdf

SECURITY CODE
To use your system from a remote telephone, you must first enter
a 3-digit remote operation security code. The security code
label is located on the bottom of the system. Enter the security
code after the system answers and sounds two tones. Within 7
seconds, enter one of the remote commands
.
OPERATING THE SYSTEM FROM A
REMOTE LOCATION
Dial your phone number. Even if the system is off, it will turn on
and answer after about 10 rings. After the system sounds a
tone, enter your remote operation security code. Enter a remote
command (see “Remote Commands” on Page 19). When you
finish, press 5# to end remote access.

REMOTE COMMANDS
Note: When listening to messages in remote mode, there is a
pause during playback every 2 minutes and 40 seconds. Press
0–9, #, or * to continue playing the message.

Press To
1# Play new messages.
2# Play all messages.
3# Delete the current message.
4# Repeat a previous message.
5# Stop and exit.
6# Skip a message.
7# Turn on/off the system.
8# Record an outgoing message.
9# Record a memo.
0# Monitor the room.
Note: When listening to messages in remote mode, there is a
pause during playback every 2 minutes and 40 seconds. Press
0–9, #, or * to continue playing the message.

Hope this Helps... Have A Nice Day... :)

Accessing the Answering System from another location.
from any touch tone phone by entering your 3 digit security code after you hear the outgoing message.
1. Dial the phone no. to which the answering system is connected to .
2. Enter the security code after you hear the tone.
3. Follow the voice menu to use the answering systems remote functions.
Review messages press 1
plack back messages press2
Stop message playback press 2 again
Erase message press 0 during playback
Skip message press 3
Turn off/on answer press 4
Review voice menu options press 7