I lost my installation disk in Hurricane Rita and need drivers can you help?

Uploaded Rita Bella 490 crib manual.

If you want to purchase a replacement disk.

Contact Lexmark here, to see if the disk for your printer is available.

If you do not have the disk you can also download the software from Internet, follow instructions below,

Click here:Official Lexmark Drivers and Software

A web page will open, follow instructions, select model, select operative system etc., and click on download .
Chose to download the file in my documents when asked.
After downloading, find the file,double click on the file ,then if you get in troubles, follow the instructions below to reset and reinstall drivers:

• Unplug printer USB.
• Go to control panel >> installed printers in Windows and remove (delete ) any installed printer from printer list.
• Download driver from website, or use the disk and run the install file.
  
• Follow driver installation wizard.
• Plug back printer when prompted from installation wizard.

pramac bought them out i just order parts today oct-15-08 call1-800-445-1805 took me awhile to get a hold of someone but she seemed to know what was going on. my guess is that the printed curciut board in the back of the generater head is bad i have had to change alot of these out.

Hi,
Don't worrly Fixya will help you in findding the setup disc very easily... To download the drivers, Please click on the below link or copy the URL and paste it in your web browser.. And Select DRIVERS, and select the operating system you are using and download the drivers..
http://www.brother-usa.com/downloads/Default.aspx
Thank you......

Hi, have lost my digilife ddv-c330 cd & i wanna u the cam as my webcam, how can i get the drivers?

one is by heating element. i can fax you the diagram if you give me fax#

Just note down the Current and Voltage rating requirement of the unit and your good. You can buy on any electronic section of your favorite Hardware store.

Was this the 220 ohm in the power supply??? and if the 5 amp blew right away then it probably took out the bridge rectifyer with the power surge that comes alog with hurricane damage to the power lines as I used to live in florida and repaired lots of sets damaged from storms!! After you check the bridge rectifyers I would start looking to find any other shorts. First measure across the ac line with the fuse replaced but not plugedf in . If its shorted check what I mentioned before if its good after you replace the shorted parts you maybe in luck. need more assistance go to sams photo facts download a schematic and we will trouble shoot this together if you post it here so i can look at it. good luck