Smeg SUK62CMX5 Dual Fuel (Electric and Gas) Kitchen Range Logo

Related Topics:

Posted on Aug 19, 2010
Be the first to answer

Trying to install a second hand smeg suk62cmx5 electric cooker following the wiring diagram on the back of cooker when i switch on the mains fuse blows any ideas how to get passed this hurdle?

Answer This Question

4 Related Answers

Anonymous

  • 1 Answer
  • Posted on Feb 15, 2008

SOURCE: cooker not heating up

removed broken element and replaced it. You have to access the fixing screws from the back of the cooker to remove it

Ad

Carmen Mikulic

  • 415 Answers
  • Posted on Sep 13, 2008

SOURCE: SMEG A 2.5 Range Oven

sound like the TOD to me. have a technician replace it.

A

Anonymous

  • Posted on Oct 16, 2008

SOURCE: Smeg Oven blowing

Phew! I'm very grateful for all that freetek but it certainly sounds like I may have a problem outside of my ability. I guess I will have to bite the bullet and get some expensive engineer to come in and sort it.
As a layman I just can't understand how it works fine for 5 years and without any alterations made simply stops! :-(

Thanks for all the advice, I will post back when and if I solve the problem, or wether in simply ends on the dump!!!

Anonymous

  • 1 Answer
  • Posted on Oct 03, 2009

SOURCE: I have a Smeg A1-1 Cooker. The main oven door does

you have to replace the door hinge's an easy fix but you have to strip the doors apart so a good time to clean.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a smeg A2-8 - second hand came with cable with terminal block missing - i have ordered this part but the electrician doesnt know which wire (FROM THE COOKER) goes where ?
https://www.manualslib.com/manual/343395/Smeg-Cs20-8.html?page=46#manual
Read full answer
Dec 08, 2021 • Smeg Ovens
0helpful
1answer

Fuse board switch off
This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  • Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  • If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  • When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

If this helped you why not get me a beer? Paul is from the Naturally he would appreciate beer How to Repair Home...
Read full answer
Jan 01, 2014 • Smeg SE399X/5 Stainless Steel Electric...
0helpful
1answer

Smeg linear oven is displaying sho (showroom mode) and will not heat up. I have held down function knob for 5 seconds which clears SHO from display but within seconds it comes back. Any ideas
This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  • If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  • When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.


If this helped you why not get me a beer? Paul is from the Naturally he would appreciate beer How to Repair Home...
Read full answer
Sep 28, 2013 • Smeg Linear Pyrolitic Single Oven Electric
0answers

Range
Read full answer
Be the first to answer Oct 27, 2017 • Smeg SUK91MFX5 Dual Fuel (Electric and...
0helpful
1answer

Blows mains fuse
This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  2. If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped you why not get me a beer? Paul is from the Naturally he would appreciate beer How to Repair Home...



Read full answer
Aug 26, 2012 • Smeg SE210X/1 Stainless Steel Electric...
0helpful
1answer

Smeg oven SUK62CMX5 dial transfers have come off
I used ovenlettering.co.uk for replacement decals for my oven. Easy
to apply.
Read full answer
Dec 02, 2011 • Smeg SUK62CMX5 Dual Fuel (Electric and...
0helpful
1answer

I have a Smeg SE 336SS-5 Electric oven, I have recently had problems with the fan motor not working and the electrics tripping out when the cooker has been on for a while. I have replaced the fan motor...
This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  2. If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.
If this helped you why not get me a beer? Paul is from the Naturally he would appreciate beer How to Repair Home...


Read full answer
Jul 07, 2011 • Smeg Ovens
0helpful
1answer

Could not find power cable for SUK62CMX5
contact your supplier or manufacturer as it has nothing to do with fixya site
Read full answer
Aug 02, 2017 • Smeg SUK62CMX5 Dual Fuel (Electric and...
0helpful
2answers

Smeg oven ss336-5 not heating
This tutorial will show you how to check your Smeg element and how to replace your Smeg cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating
  1. Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Smeg manual.
  2. If your Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
  3. When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

If this helped like us on Facebook please How to Video Tutorials on Domestic Appliances
Read full answer
Jan 21, 2009 • Smeg SE399X/5 Stainless Steel Electric...
1helpful
2answers

Cooker not heating up
removed broken element and replaced it. You have to access the fixing screws from the back of the cooker to remove it
Read full answer
Feb 14, 2008 • Smeg A2.5 Dual Fuel (Electric and Gas)...
Not finding what you are looking for?

View Most Popular

SUK62CMX5 Dual Fuel (Electric and Gas) Kitchen Range

  • Kitchen Ranges

Related Question

I have a smeg A2-8 - second hand came with cable with terminal block missing - i have ordered this part but the electrician doesnt know which wire (FROM THE COOKER) goes where ?

  • Smeg Ovens

Related Topics

98 views

Ask a Question

Usually answered in minutes!

Popular Questions

How do i change the volume on the oven timer? i

Smeg Kitchen Ranges

My SMEG gas oven won't stay alight. When I stop pressing the oven regulator the gas goes out.

Smeg Kitchen Ranges

The transfers on the front of my cooker have come off

Smeg SUK62CMX5 Dual Fuel (Electric...

Smeg KSE1V950X fan lights flash?

Smeg KS9XSE Stainless Steel Kitchen...

Smeg Oven blowing

Smeg A2.2 Gas Kitchen Range

Top Smeg Kitchen Ranges Experts

vince

Level 3 Expert

2530 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39387 Answers

Are you a Smeg Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...