My headset got wet with sweat and i think that the battery shorted out. It now only works when plugged in. I have 2 other sony ericsson bluetooth headsets that were inundated during the great flood brought about by typhoone ketsana in the philippines. sony ericsson service centers here in the philippines don't service such devices, they only accept replacements under warranty. Could you suggest somewhere, anywhere, i can have it serviced and repaired. thanks.

SOURCE: pairing

read the manual page 64 bottom right corner

SOURCE: headset problem

no my speaker works my phone just thinks the headset is always connected

SOURCE: bluetooth headset hb600 does not pair up to k800i

Hold down the volume buttons on the side till the button on the front turns red. Then try to pair, your phone should find it right away...put in 0000 and push connect on your phone. I just paired it with my iphone.

SOURCE: please need help urgently

You should press both + and - button on your head set and wait until green light turns into red.

SOURCE: Sony Ericsson not recognising motorola n356 headset re bluetooth.

Hi,
If you have lost the pairing on your phone with the headset follow these simple steps below:
• Setting the headset into pairing mode
1) Ensure the headset is fully charged
2) The headset must be switch off
3) Press and hold the on button for +- 8 seconds until the light flashes red-blue
4) The headset is now in pairing mode
• Searching for the headset on the phone
1) Go to “settings” or “connections”
2) Select Bluetooth, then options
3) Select Devices and click add
4) The phone should search for any available Bluetooth devices and display what was found
5) Select the Motorola device and click add
6) You will be required to enter in a pass code which is standard ‘0000’.
7) If successful then the headset will start flashing BLUE every few seconds.
8) If it’s a Samsung or Nokia phone you will need to “AUTHORIZE” headset on the device.
• The headset is now paired with the phone

Hope this helps

Chris (ziraffa)