How to properly set fax to send and receive ?

Go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set. Make sure the phone wire which you insert in fax machine getting proper dial tone and getting out going calling facility.
Have a nice day and do not forget to rate please...!

Go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set. Make sure the phone wire which you insert in fax machine getting proper dial tone and getting out going calling facility.
Have a nice day and do not forget to rate please...!

Go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set. Make sure the phone wire which you insert in fax machine getting proper dial tone and getting out going calling facility.
Have a nice day and do not forget to rate please...!

check the phone line is properly connected and you are getting dial tone and dialing facility from the phone line which is connectd to fax line.go to menu option and choose the option fax and set the parameter like auto receive or manual set the ring auto answer mode after certain ring. If it is in auto receiving mode it will receive the fax after the ring which you set.

You will have to set the fax to auto receive faxes. The "How To.." guide will be in the manual that came with the printer. During this set up you will put your fax number and the setting that is needed. Also i had issues from some customers that had a similar issue because they did not properly put the phone cord in the correct port in the fax, please read the diagram. this is very common, but easy to fix issue. most of the time ;)

your computer has to be set to answer the phone so it receives the data and sends it to your printer. unless the data is demodulated via the modem or other demodulating softwarew .. it cannot be printed and or viewed. check your settings in the "printers and faxes area of the control panel to verify proper settings or make any necessary changes.

Make sure the receive faxes button is set properly. If it is not set to fax only, you will need to manually receive faxes, the machine will not auto answer.

Are you able to receive faxes from others from the same location, if not just ask her to consult her service provider and ask to get the no checked of yours why is it that you she is not able to send fax to you only as your fax machine is capable of sending and receiving fax from others it should be dsome issue with her service provider.
If it was your All-In-One printer thrn you should not have received faxes from any one, not a specific number.

Good Luck

check is your fax properly set,is on automatic or manual.I you receiving fax manualy you must pick up the phone then press start buton.that is the problem in most.

Can you pick up the receiver on the phone and hear the fax tone when receiving? If so, can you then press the start button and begen receiving? If that works, then the fax auto settings are not set properly. Do you have the owners manual? Read the receiving fax section.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de