User's manual for epox mother board ep-8k9a7i

click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working

ports(com&lpt)right click update driver

if this fails to fix the problem
check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts

click start click to open on my computer you should see your usb drive F: right click select properties there will be an array of options select the sharing tab option then advanced sharing make sure you have a tick in the share this folder box then click permissions make sure you have full control in windows 7

click start control panel user accounts click on the administrators account if you have made one or you will have to create one in windows XP
also
If you are running a Windows XP OS then you might be able to:
click start right click on my computer select open
Right click the icon of your Flash Drive (It should be F: / E: or something)
Click Properties in the menu that comes up
Click the Sharing tab
Click permissions
And finally, click Allow next to Full Control.

if you need more help with this post a reply

hope this helps you

Your products home page here:

http://www.epox.com/product.asp?id=EP-8K9A7I

Good luck.

http://www.epox.com/downloads.asp?class=MANUALS&item=EP-8K9A7I
If this answers your question, I'd appreciate 4 thumbs. I do this for fun and do not get paid.
Jim

by a usb card or external usb hub with 4 ports

Use the site below to download the driver of your BIOS.

http://driverscollection.com/?file_id=31032

Type the code to download. Hope it will help you,

Regards PCmania

Check your Memory, Video card and any other cards installed in your motherboard. Try to remove, clean and put it back again, then check if the beep is still there.

http://www.epox.com/product.asp?class=MB

if helps rate me

Hi debong,
click on this EpoX driver link for you're EP-4PDA3i motherboard.
(Sorry EpoX does not seem to have a bundled driers. You have to download single drivers, one at a time).
http://www.epox.com/USA/downloads.asp?class=DRIVERS&item=EP-4PDA3I

Main Web site for EP-4PDA3i
http://www.epox.com/USA/product.asp?ID=EP-4PDA3I

Good Luck!
Mike

Here you go. http://drivers.softpedia.com/get/BIOS/Epox/EPOX-EP8K9A7I-Bios-14.shtml

there is no solution. epox sux!!!!!