Sharp AR-163 Copier

replace toner cartridge with OEM do not use third party

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

how to clear red sing on tonal problem for sharp ar 163

Is the code a H5 ? Is it a AR-163 or a AR-287? Is the copier making a load noise when making a copy? Basicly, the code means you are have more then 5 paper jams in the fuser & there is a problem there & the copier is locked up.... It's self saving it self

You must your copier TD cartridge,then solve your problem.If you are not fix it,Then press
C>Photo>C>photo>16> start key

Hello sir; The error code you display is CRUM communication error.

there will b something else in front of u2 press start to see

Is there any alpha numeric display on the quantity display LED such as F2 with flashing 04 or any other trouble display?
I will get back to you as soon as you can give this information.

is giving error found

You can hold down the start key when the F1 is displayed it will show a sub code. The service manual for that model shows only one F1 code which is an F1-06. That is a shifter motor trouble. That is the section after the exit that offsets the copies.

You can reset the code with the instructions below. If the error recurrs then chech the exit section shidter for proper movement. You may require an on site technician to remedy this issue.

To reset the error code:
Hit <clear> <interrupt> <0> <interrupt>
14 <start>

check my site under error codes/Sharp

http://checkitright.spruz.net/main.asp?page=dp&dis=592197