All of a sudden, whenever I attempt to embroider, the bobbin thread completely covers the upper thread on the top of the embroidery. I tried adjusting the upper thread tension, but it doesn't seem to make any difference whether the tension is on 0 or 9. I changed the bobbin thread to a contrasting color so I could see what was going on. The only thread visible on top and bottom is the bobbin thread.
Thanks!
For embroidery, and zig-zag, and because the needle makes side movements, it needs more needle thread.
So try to keep you needle thread not very tight,
and tight up your bobbin case tension more, so that the two threads meet under the meterial.
517 views
Usually answered in minutes!
I am having the exact same problem.....and am very frustrated.....some one please help....
I am also having this problem also; I've tried loosening the thread however, it still does it. Any other suggestions?
Thank you!
that is what I could not figure out.....I can't seem to find a place to tigten up the bobbin case tension....instructions are only for the upper thread tension
top thread is not catching the bobbin thread
Upper tension too loose, top thread doesn't go into material no matter what I do
×