Oncoming phone calls from internal ext go directly to speakerphone instead of ringing

Do not press the conf/transfer key.
press the intercom button first.
Then press the day key or dial ext number.
Tony
732.720.9369

You will need to change the programming for the ext that you want to have the lines appearing on.
Enter programming - Feature **266344
PW - 266344
Press the show key - (top right arroe that is lit on the display)
Enter the ext # you want to change
this will bring you to line appearance press top r arrow
line assignment press top right arrow
show line - enter 001,002 or whatever line(s) you want to ring.
press the change softkey for each line to appear and ring instead of unassigned. Press the next (bottom r arrow) to go through each line after entering 001....
then release.
*** Make sure the sets you change are not forwarded to voicemail after a certain amount of rings otherwise all calls ringing on the newly programmed set will go to that persons voicemail.

.. I don't have a solution, I need a solution.
NEC Dterm Series I, through internal calls my phone flashes notifying me that I have a call coming through but it doesnt ring. I have tried the volume key ^, that didn't work. Can anyone help me?

This has to be done on Ext 101, or whichever phone is the programming phone. Press program *#1234. Then enter in 004. Press Speakerphone. It should be asking for a jack number. You can press speakerphone again to go to the first ext. Spell out the name using the keypad (2 is A, B and C and so on). When done press the autodial/store button. Then you can press speakerphone to go to the next phone. To get out of programming just pick up and hang up your phone or press the program button.

Sounds like extension has put the phone on transfer. You can try these steps on the Extension 241 phone and see if it will correct the issue. 1. Press the Feature button, then * 2
2. Push the button you want to program
3. Display will read "Intercom #:__"
4. Enter the extension number

There is a second program that assigns digits to "0". You found the one in the phone system, but not the AA/VM. It's probably still trying to dial 101. Make it dial either "0" or 110.

Carl

There is, but these settings are setup in Call Manager, or Call Manager Express. I would see your systems admin to set the default priorities.

Changing ringing on a Partner system is done on either ext 10 or 11.
At one of those ext's press the feature key and "00"
Next press the left hand intercom twice
The display should say system programming

Press the right hand intercom once. The display should say Centralized Programming.

Enter in the extension number that you want to program.

Press the line that you want to ring.
A solid light on the line means immediate ringing
A slow flashing light means delayed ringing (meaning the phone will wait 3 rings before starting to ring.)
A fast flashing light means no ringing.

When finished with that station press the right hand intercom and enter in the next extension to program and set ringing accordingly.

Press feature "00" to logout

You're not forwarding calls, you're TRANSFERRING calls. Try Feature 70.

Carl

Do you mean send the call to another phone?
Make sure the line is not on hold (push the caller's line) then push Cnf/Trn, dial the extension you want the call to go to, then hang up.
The person you're sending to will receive that call on their speakerphone button and it will ring in a different tone.