HP ProLiant ML370 G4 Server Logo
Posted on Aug 10, 2010
Answered

My HP Proliant ML370 G4 can not boot. 1 of the logical drive has a problem and in interim recovery mode. how come it can not boot? there is also an error saying the battery is unable to charge. cache battery. Please help!

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

  • Contributor 5 Answers
  • Posted on Aug 11, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Mayor:

An expert whose answer got voted for 2 times.
Problem Solver:

An expert who has answered 5 questions.

Joined: Aug 11, 2010
Answers
5
Questions
0
Helped
5463
Points
10

Dear erwin,

as per your writing the server raid has broken .. its may be a problem with a hard disk , first you have to check the hard disk state . to do that you should enter into raid bios . don't try to something on that , just see the status of logical drive then which are the disks includes on that raid

in you post also it may give the details of failed disk ids

then you may have problem with your batt. unit , for that please do the above steps first then back with that...

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

After trying to clone windows server 2008 r2 from an HP ML370 the server now hangs on attempting to Boot from Hard Drive (c:)
check & set the boot controller order in BIOS
Read full answer
Aug 21, 2013 • HP ProLiant ML370 G4 Server
0helpful
1answer

Install new OS
Use the HP Smartstart CD and configure the with array with 2 arrays and 2 logical drives. The first with OS array on RAID 1 (2 drives mirrored). The second array on RAID 5 (3 drives minimum).


http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18964&prodSeriesId=345557&prodNameId=344318&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-bd347636805e4917a617382469


Make sure to use Insight Manager for worry free monitoring.
Read full answer
Oct 22, 2012 • HP ProLiant ML370 G4 Server
0helpful
1answer

We have hp server ml370 when i restart the server its stopped on attempting boot from hard drive c and never continue
This is because either the image on the hard drive is bad (corrupted, missing boot sector, etc) or because the hard drive itself has some issue like corruption etc.
If this is a mirrored raid array (two drive mirroring each other) I would try to remove one of the drives and boot again. If that does not work reinsert and remove the other drive and try to boot.

regards,
Mike
Read full answer
Oct 21, 2012 • HP ProLiant ML370 G4 Server
0helpful
1answer

Compaq ProLiant ML370 G4 (374490421) Server - Windows xp issues
Servers need the Drivers for the Drive array card.
The server should have come with a smartStart CD that has the drivers for it.
You are NOT going to get another OS on this machine unless you load the drivers for the adapter.
... and why put XP on a Server? that's not the optimal OS for the hardware.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/lisa_52daba487e5b4d53

Read full answer
Dec 12, 2011 • Compaq ProLiant ML370 G4 (374490421)...
0helpful
1answer

Cannot boot from CD rom? thank you in advance
CHECK IF THE CD IS BOOTABLE.
GO TO BIOS SET THE FIRST BOOT DEVICE TO CD ROM AND DISABLE ALL OUTER DRIVES. SAVE AND REBOOT. IF THE CD IS BOOTABLE THEN IT WILL SURELY BOOT FROM IT.
REGARDS.
PLZ. DON'T FORGET TO RATE
Read full answer
Jul 05, 2011 • HP Compaq ProLiant ML370 G4 Server
0helpful
1answer

We recently had a HD failure on our HP Proliant ML370 G3 server. The failed drive is in a RAID 5 configuration, so we simply purchased a replacement drive, and installed it. The problem, is that it...
why not ask HP this, and not in chat rooms. (here)
raid recovery is fully documented at Hp.com
for sure, and even forum help...
you'll have to switch to the commercial, side,

https://h30434.www3.hp.com/

type this in there box.
HP Proliant ML370 G3 server
Read full answer
May 13, 2017 • HP ProLiant ML370 G3 Server
0helpful
1answer

HOW CAN I CANNECT HP ProLiant ML370 HARD DRIVER
Hello,

The best way to connect is to use the Ethernet cable to connect each pc to each other or use a Ethernet hub to connect the two together.

Good Luck
C2S
Read full answer
May 27, 2010 • HP ProLiant ML370 G4 Server
0helpful
1answer

The system is setup using the RAID 5 config, now out of 5 drives it says 'OK' for 3 drives on 0, 1 & 2 and for 3 & 4 it says 'Replacement'. Is there any way of finding the correct Logical sequence...
Dont you have any levelling inside the machine? Go open and check.

When you have replaced the 2 defective drives with a new one, restart the computer and Raid 5 will automatically rebuild.
Read full answer
Jun 18, 2009 • HP ProLiant ML370 G4 Server
0helpful
1answer

Harddrive array sequence causing system in booting
If the only drive you changed was the drive that failed and all the others are in the correct sequence, then that's a good thing.

The next question is, did you have this system setup in a RAID Array and if so, what RAID configuration were you using (RAID 0,1,5, etc.)? Some RAID configurations allow you to replace a failed drive and not lose data, but I will need to know more about how you set the system up in order to help you more.
Read full answer
Jun 18, 2009 • HP ProLiant ML370 G4 Server
0helpful
1answer

Hp proliant ml370 g4 rebooting problem
Try to boot from smart start and do offlinr diagnostics.have you purchased second cpu seperately? Check the CPU compatibilities.
Read full answer
Jul 16, 2008 • HP ProLiant ML370 G4 Server
Not finding what you are looking for?

View Most Popular

ProLiant ML370 G4 Server

  • Computers & Internet

Related Question

After trying to clone windows server 2008 r2 from an HP ML370 the server now hangs on attempting to Boot from Hard Drive (c:)

  • HP ProLiant ML370 G4 Server

Related Topics

621 views

Ask a Question

Usually answered in minutes!

Popular Questions

02A2: BMC System Event Log(SEL) Full

HP Compaq ProLiant ML110 G4 Server

I need to download an hp proliant ml110 driver for window xp

HP ProLiant ML110 Server

HP proliant dl 360 g3 error code 1611 cpu fan failure

HP Compaq ProLiant DL360 G3 Server

HP Proliant ML110 drivers required

HP ProLiant ML110 Server

Fan flow error 1611 I/O

HP Compaq ProLiant DL580 G4...

Check Out the Mobile Browsers Report
Check Out the Mobile Browsers Report

View all Fixya Reports

Top HP Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...