How to put together a coleman deluxe fish pen

Moved from Garden category
Edited question into what I think you meant to say. ;>)

They aren't made to be taken apart, you just buy a new one for 10 bucks. Parts like springs are easy to get off but pretty much impossible to put back.

https://totalmerchandise.ca/product/eagle-torch-premium-butane-gas-pen-pt132p-lighter/

HOWEVER, having said that, there are videos for taking apart and putting them back together. This is the 'Reassembly' link

https://www.google.com/search?q=how+to+put+a+eagle+pen+torch+lighter+back+together

..
..

You could try Coleman, they might be able to supply one.

The Coleman Company, Inc.
3600 North Hydraulic
Wichita, KS 67219
1-800-835-3278
TDD:316-832-8707

re-install the game ....

I wasn't able to find the manual for this exact tent, but you can find the instructional pdf for a very similar Coleman tent here: http://images.owneriq.net/download/images/a/a2b135c5-2f4c-f344-4952-99319efb54aa-000001.png

The video below may also help you see what the tent looks like once it has been put together (different angles may be helpful). Best of luck!

I'm answering this specifically for the Australian-made Wild Country deluxe smoker which comes with two spirit burner trays. i.e. NOT with gas fittings, thermometers, or anything else.

I too have one, and it was also missing any instructions.

I suggest the following:
1. Preparation of fish for smoking.
* scale the fish as required
* either fillet or split fish, along dorsal line and clean (skin on, head and tail removed)
* make sure it is dry, e.g. using paper towels
* spinkle liberally with mix of salt, sugar and oil or fat
* refridgerate until ready

2. Assembly for of deluxe smoker for use.
* fill the main tray with two handfulls of sawdust/wood chips for smoking to depth of a few millimeters.
* place the (flat) drip tray on top of the sawdust, feet down
* place the larger of the two racks on the drip tray
* place the first fillet on this, skin down
* balance the 2nd rack on top of the first
* place the second fillet on this one, again skin down
* put the lid on the main tray

3. Smoking:
* prepare the burners, by mostly filling them with white spirits or methylated spirits, and positioning inside the rectangular black burner stand.
* light the burners
* put the closed smoker containing fish on top of the burners
* check fish is cooked through after about 15 minutes
* leave it while the fuel burns out (might take 15-20 minutes - you can also leave it there closed until it cools down)
* carefully remove smoking racks with fish

(PS. Or cheat like I do by simply placing the whole smoker on top of a gas BBQ and don't bother with the spirit burners)

can somebody give instructions for the trigger instead of referring to the exploded parts?

you can put the weights on leaving about 3 feat of line then tie the hook on by putting some line through the loop in the hook and twisting it about 7 times upward and pulling the excess line through the bottom loop in the line. Or just attach the floater with a little bit of weight under it with the hook put on the same way.

I have put together a short video for my daughter on setting up the Coleman classic Model 8534-830. I can send you the link if you need it--it is a private video because it is not great quality, but should do the trick.

the instructions are useless anyway. you put the red poles through the 2 side bedrooms. the black rods and the black poles with the bends in join together and go diagonally through the middle of the tent. the yellow rods join together with the black poles with the yellow tape round the ends and u fit these from the inside of the front and back entrance then when the tent is up you just hook the bedrooms in. hope this was usefull

http://www.coleman.com/coleman/manuals/ This link should take you to where you can get the manual from.

The rest of the Coleman info is below:

This automatic response has been generated to let you know we have received your message.)

Thank you for contacting Coleman, The Outdoor Company. We appreciate your interest in Coleman products and will be in touch as soon as possible.

You can now order repair parts http://www.coleman.com/coleman/parts/PartsDefault2.asp

find the FAQs
http://www.coleman.com/coleman/faq/home.asp

and close-out items http://www.coleman.com/coleman/ColemanCom/category_main.asp?CategoryID=31000
through our web site as well as view new Coleman products as they become available http://www.coleman.com/coleman/colemancom/prodlist2.asp

You can also locate dealers of Coleman products in your area and register to receive new product information direct from Coleman.

Product manuals are also available
http://www.coleman.com/coleman/manuals/

as are product videos,
http://www.coleman.com/coleman/media/prodvideos.asp

a buying guide
http://www.coleman.com/coleman/guide/guide.asp

and warranty information.
http://www.coleman.com/coleman/warrantyinfo.asp