While instaaling fast track pro i get a msg that your computer's operating system is not supported for the use of fast track pro at this time

Short answer to your question NO !!!

Most likely the driver in the computer is NOT active or loaded properly... You haven't even told us what computer or operating system you have. The unit will NOT come on till the computer recognizes it and loads driver.

My suggestion is to uninstall the Fast Track device, restart and then reinstall the software. Also, not knowing the computer you are working with, I would also suggest that the speakers are not disabled somehow ( IE, Mute button that got accidentlly activated). Was anything else done to the computer between the time is was working and the time it stopped working). If your audio card and and software are working properly, your speakers are the problem.

Let me know if you can add any more detail to the issue so I can help your further if necessary.

Brian

Only though firewire.

Not through usb. USB is not fast enough for real-time file transfer (audio or video). That's why firewire was created.

All you have to do is to connect with 2 cables your mixer's output to the two 1/4” TS plus in the front side of the Fast Track Pro and a usb cable from the rear panel of the Fast Track Pro to your pc's usb port. I suppose that you have installed the drivers for Fast Track Pro at your pc.
Anyway in case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios

It's probably because the software is not 64bit compatible.Though I'm not 100% certain.

1) after copying it to the new computer, right click and hit the properties tab. Make sure that you UNcheck the read-only tab and press apply when your done. For some stupid reason GT-pro 2 will not open read only files. I had this problem many times when backing up to cd since the files on the cd were read only.

All you have to do is to connect with 2 cables your cd's or dvd's output to the two 1/4” TS plus in the front side of the Fast Track Pro and a usb cable from the rear panel of the Fast Track Pro to your pc's usb port. I suppose that you have installed the drivers for Fast Track Pro at your pc.
Anyway in case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios

All you have to do is to connect with 2 cables your behringer mixer's output to the two 1/4” TS plus in the front side of the Fast Track Pro and a usb cable from the rear panel of the Fast Track Pro to your pc's usb port. I suppose that you have installed the drivers for Fast Track Pro at your pc.
Anyway in case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios

As the Fastrack can only receive one audio signal at a time you would have to record each track seperatly into Pro Tools.

I'm guessing your mixer is a multitrack recorder.

Solo track 1 on the multitracker and playback from there into the Fastrack, with track 1 on Pro Tools set to record. Repeat this for each or your tracks on the multitracker.

When you've finished you'll need to align all the tracks in Pro Tools so they all playback in time with each other.

Hi,

I guess if your still looking for an answer your probably desperate. Never the less, if someone else is looking for an answer you need to select FT Pro in the preferances. Basically, you have to tell the software what to record and when. Pretty easy really.