Camera storage problems

Hello there,

The Flip Ultra should have a rechargeable AA battery pack.

To verify it is charging, the battery icon will be flashing lightning bolt. The red light goes from red to green the moment it is fully charged. It takes six hours before it gets a full charge via the USB.

Please let me know if this gave you enough information. Thank you for using FixYa.

1) Put your Flip Ultra back into the pakaging box
2) Keep it safely inside your fridge (make sure the fridge isnt on or the best is an old fridge model)
3) Scratch your head and scratch your nuts in the same time for thirty second
4) Turn on your Flip camera, press the red button for setting, and change it to indonesian language. If no indonesian language in the setting, shake it 3 times. It surely has.
5) Jumping around on your parent bed.
6) Sing Britney Spears song and film it yourself.
7) Press stop button
8) Post it on youtube.

I hope this will fix ya problem. Have a nice day :)

connect your flip cam to your computer.openo c drive on your computer.open flip program.look for trash file.empty it.that will restore your full 2hr record time

16. How do I reset a Flip Ultra or Ultra HD camcorder?
To fully reset a Flip Ultra camcorder, please remove the batteries and leave it powered OFF for 48 hours.

I would try a reset before anything, else.

Remove the battery. Connect the camcorder to the computer's USB port. The computer will show the autostart menu or give a beep. Insert the battery now. Use the 'Safely Remove Hardware' option, stop the device and remove the Camcorder from the Computer. Close the battery compartment. Bingo! The device works :-)

ok, this totally helped w/ mine, I have a 120 ultra and it made my remaining recording time to back to the original time, thanks a bunch YD CORP !!

UNIT: ultraHD
PROBLEM:
I just had this problem: I turned it on, started to record a video, but it hung up on frame #1, with the record red light stuck on. And I couldn't do any of the following: restart the recording, play already recorded videos, turn it off, connect to PC.
SOLUTION:
I removed the battery for about 30 seconds, then replaced it. my UltraHD flip works great now.

I had the same problem with my flip mino HD. Here are the steps I took to fix it.

1. Adjust the power options on your laptop to ensure it does not sleep/hiberate ever.
2. Reset the camcorder by inserting a paperclip into the hole in the tripod mount. Hold the paperclip in there for about seven seconds.
3. Then immediately plug the flip into the cpu.
4. You may not see anything besides the little blinking white light on the USB arm for a while (about 30 minutes maybe) but leave it in.
5. Eventually it should spring to life and show the recharging battery on the little screen (the Flip Share program may start too.)
6. Leave it charging until the little white light stops flashing - full charge about 3 hours.
7. You can then remove the flip and change the power settings back to normal.

I had the same problem so I tried the thing on the website and it didn't work so I looked it up on Youtube and someone figured out how to do it. I tried it and I got all 60 minutes back. You should try this, it probably works.
PS instead of 5 nines it's 6 nines.

Take out the battery and leave it out for 48-72 hours. I had the same problem and Flip support suggested this solution which fixed the problem.