At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
TEMPERATURE READOUT NEVER REACHES POTENIOMETER DAIL SETTING.ELEMENTS ON OUR DOUBLE STACK 1132 IMPINGER ALL READ CONSISTANTLY 28 AMPS @ 208V.SWAPED THERMOCOUPLES BOTTOM TO TOP TEMP DISPLAY DID IMPROVE BY 50 BUT NEVER TO SET POINT .2ND, LOWER OVEN ONLY HAD A THERMOCOUPLE NOT A THERMISTER FOR READ OUT SPECIFICALLY AS THE TOP OVEN DOES.SAYING THIS TO RECAP,TOP OVEN NOT TO TEMP ,BOTTOM MUCH CLOSER TO TEMP. SHOULD I JUST BUY NEW TC/THERMISTERS ,RIGHT FROM OEM TO START WITH ORIGINAL EQUIPMENT JUST AS A START POINT.I REALLY DON KNOW IF ANYONE ELSE HAS ALTERED UNITS.
Re: TEMPERATURE READOUT NEVER REACHES POTENIOMETER DAIL...
You could also check that the fingers are properly fitted in place at the point where thy join oven and the glass window is closed. make sure that all the elements are working well
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
t sounds like there may be an issue with the temperature control system in your Lincoln oven. Here are a few things you can check:
Make sure the temperature probe is clean and inserted properly into the oven. If the probe is dirty or not inserted all the way, it may not be accurately reading the temperature.
Check the thermostat for any signs of damage or wear. If the thermostat is faulty, it may not be able to regulate the oven temperature correctly.
Look for any loose or damaged wiring. Loose or damaged wiring can cause the oven to overheat or not heat up at all.
If the above checks don't identify the issue, it may be time to call a professional technician to diagnose and repair the oven. They will have the necessary tools and expertise to diagnose and fix any issues with the temperature control system.
Your wiring diagram and parts schematics are here in the link below. Normally the bottom element does glow read hot after a couple of minutes. Broil elements last a lot longer because they aren't used as much. There is only one Control Board. If I was guessing, I would say the temperature sensor is at fault. Elements either work, or they don't, but you can easily test continuity with a meter. Many parts are discontinued.
I need to know the Power rating Example 5Kw or the Ampere Ex. 30A . What is the raring of each oven? The Breaker should be greater than the Ampere of your oven let say 120% greater.
If it is not a fan assisted oven, then I would say that one of the side elements has gone, u will have to locate and check it,or put the oven for a couple of mins, then check the elements they should both be hot.
Hope this helps.
Plz rate this solution.
Thanks.
×