Panasonic SA-HT840 Unit display show "F61" - Panasonic sa-ht800V Home Theater Audio System SA-HT800V System

Hello Wothi, what problem do you have with the Panasonic DVD HOME THAEATRE SOUND SYSTEAM SA-HT840?
Comment, so you can find the best possible solution
I await your comment
Greetings Franco Dosil
Hola Wothi, que problema tienes con el Panasonic DVD HOME THAEATRE SOUND SYSTEAM SA-HT840?
Comenta, asi se podra buscar la mejor solucion posible
Espero tu comentario
Saludos Franco Dosil


https://data2.manualslib.com/pdf/12/1196/119527-panasonic/scht530.pdf?186ff556e26ad10812790cfa6919fbea&take=binary
https://panasonic.ca/viewing/ALL/SC-HT340/OI/rqt8732-1b/rqt8732-1b.pdf

www.panasonic.com/uk/support.html

As sugested by many experts.I replaced the ic no rsn311w 64d,still the error code f61 appears.Now where is the fault.?
this is for the Panasonic sa-ht 880.

Hi ahamedfaisal,
Does F61 appear after a minute of playing or shuts down immediately after you power on the unit?
Jdvillanueva

HELLO

As far as I can know, F61 means your output IC is dead. Contact a service centre in your locality for repair!

you need a code 234634
it is wary simple to fix

if the code dosent work the there is

the f61 code is an audio code for panasonic first make sure all connections are correct and tight for spearkes...at the base if unit has base and with connections in back of unit and are fully in to connection terminal...make sure speakers are on and not on mute ...sometimes though you may have to re strip the wires to get into connection termianl in the back of the unit if that does not work call panasonic 1-800-211-PANA(7262) for more technical support

The F61 indicates a problem detected in the output amp stage and the unit us shutdown to prevent further damage. If you can supply the model number, I can give you the part required and the approximate cost.

Dan

Try to power on the unit without the speakers connected. If it works normally without the error showing, then a speaker wire maybe shorted or a speaker defective. If the error F61 is still there, then most likely the Regulator IC is defective in the unit.

The F61 indicates protect mode. There is a problem with the output stage of the amplifier section and the unit shuts down to prevent further damage. This unit will require service of the amp section. You can try to contact Panasonic for the service manual.

The output amp pac is an RSN311W64D at a cost of $95 plus shipping.

Dan