I'm trying to make some business cards online using a file that i made with print shop 10. the website tells me that the resolution is too low. how do i remedy this

In this ongoing era, having a business without a website means no chance of growth. You are missing a lot of potential customers who are not aware of your presence in the market. Visiting you store on the local street is not the only way people used to do shopping. Trend of visiting an online store from your mobile phone or laptop is the future of window shopping.

You are asking about 3 reasons for small business to have website. In fact there could be many reasons but the most important three reasons are very well explained in a blog published on official blog website of RE2QA. Check this here and it will be the answer you are looking for.

You need to set the print size to match the size of the card.

you either need to resize the document or change your print preferences to match the size of the card.

What do I do if I have a question or think there is an error on my card?

In case of errors or questions on your Card transactions you should call us at 1-877-937-4098 or print and complete a Transaction Dispute Form and fax to: (626) 739-2060 if you do not have access to a fax, please mail to: Walmart MoneyCard c/o Customer Dispute, P.O. Box 1187, Monrovia, CA 91017 as soon as you can. Contacting us immediately after you notice an error on your card transaction history is the best way to protect your money and ensure that you are within the allowed timeframes to dispute purchases. Click here for more details. You may request a written history of your transactions at any time by calling or writing us. When notifying us, you will need to tell us:

• Your name and Card number.
• Why you believe there is an error, and the dollar amount involved.
• Approximately when the error took place.

If you tell us over the phone, we may require that you send us a letter within 10 business days. We will determine whether an error occurred within 10 business days after we hear from you and will correct any error promptly. If we need more time, we may take up to 45 days to investigate. If we need more time we credit your Card within 10 business days for the amount you think is in error, so that you will have the money during the time it takes us to complete our investigation. If we ask you to put your complaint or question in writing and we do not receive it within 10 business days, we may not provisionally credit the Card. We also may not credit the card if the error does not represent a qualifying dispute, as identified in the Disputes with Merchants section of the Cardholder Agreement. Click here for more details. We will let you know the results of our investigation within three business days of completing it. If we decide that there was no error, we will send you a written explanation.

I will advice you to locate the print-shop folders that are on your computer. or simple open one of the files you created with this software and right click file location. it will open where all the other files are stored on your computer. backup everything stored on your computer to a flash drive.
Let me know if this solution helps.

If you are scanning, you should be able to set the resolution (DPI x DPI) in the scanner configuration. If it is blurry, it could be that the default scan resolution is lower (10 dpi or even 75 dpi).
Settings location will depend on the scanner and software used.

Best scan at an equal (300 dpi) or even higher resolution, so you can scale the image afterwards without quality loss.

if your print workshop has cd with it install it then choose the template for business cards , design it and print. If your cards do not have cd with it you will have to go to openoffice.org download what you need to create the business cards. Hope this helps if it does'nt repost I will be watching for it.

Verify no pieces of the card paper are missing and try printing on plain paper to make sure. Then try new card paper and make sure none of the perforations are separated.

It doesn't do much good to post that information on this type of forum.

You need to write to the manufacturers of the Print Shop Pro and let them know of your problems, and request a replacement or refund from them.

I would also suggest looking at their website online - http://www.broderbund.com/, and see if there is something else you could find out about your installation.

I have an earlier version of this software. It is 99% clipart, and 1% forms, but useful if you have no other way to create a web page or business card. (You can create business cards in Word too.)

Also, be sure when you try to install it that your firewall is temporarily disabled, or your computer might treat your new software like a virus.

Good luck (buenos suerte) -

A P72 should be good enough for 4x6 prints. Are you shooting at the maximum resolution? At 3.2 Megapixels you should be able to print at 4x6" at 250dpi (which although not ideal is better than that of most magazine printing!)

The graininess of your images is not to do with resolution but rather sensitivity and the processing engine in the camera. Are you shooting in bright light, or mainly with the flash? If it is the latter, I'm afraid you're always going to have the picture noise (graininess) with this camera.

If you're going to upgrade, look for a model with good low light capabilities and a good lens. www.dpreview.com is an excellent resource for comparison shopping.

It sounds to me that for whatever reason, you might be trying to export the thumbnail copy of the picture. On a 5MP you are right its more than enough to develop in sizes up to an 11 x 14.

However (I'm not too familiar with the Mac software, my apologies) if you are exporting or saving the thumbnail to your card, they will save at a far smaller size, and would lead to your pixellation problems, and the reason why the pictures are not coming out okay.