Question about ESQ 07301132 Aerodyne watch

1 Answer

Setting time day date in ESQ Aerodyne

I have bought a new aerodyne 07301132. However, i am not able to set the time zones, day, and time. Also, i am not able to set the alarm for the same. Need instruction manual or some one who can help with this

Posted by on

  • shakun1930 Jul 26, 2010

    Thanks!! I already tried that option out but it does not clearly states what to do for Aerodyne watch..However, I tried the options and they doesnt seem to be working..:(

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Posted on Jan 04, 2012

  • Jason Wragg
    Jason Wragg Sep 13, 2017

    You sir are a legend, thank you!!!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set time on polar rs300x


Access watch settings scrolling by UP/Down button.
<Settings> <Ok> <Watch> <Time and Date Settings>

In Time Settings:
Set the local time (Time 1) and a time difference to it (Time 2).
With Time zone, you can select which time zone is used.
In Time view, you can easily change the time zone from Time 1 to Time 2 by pressing and holding DOWN.

Set the date with Date setting.

You can also download the user manual from the link below
http://www.polar.com/e_manuals/RS300X/Polar_RS300X_user_manual_English.pdf

Oct 06, 2015 | Polar RS300X Watch

2 Answers

How do I set the time and how do I get a user manual.


1. set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date

2. if off sync between analog and digital clock happen. You need to resyn
step 1: follow the instruction 1 to set digital clock to 12:00.
step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync mode.
step 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.
step 4: push the pusher at 3:00 to exit the sync mode.
step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Jun 18, 2011 | ESQ 07301132 Aerodyne watch

1 Answer

How to set the date


Time and date setting
are only necessary if automatic setting by radio broadcast is unsuccessful.
To set time, date, and options:
1) With time and day showing, press and hold SET.
2) City code flashes. Press START/STOP to select city that represents your time zone. See table below
for city codes.
3) Press MODE. DST (daylight savings time) setting flashes. Press START/STOP to select AUTO (obey
setting in radio signal), ON, or OFF (disregarding setting in radio signal for ON/OFF).
4) Press MODE. Hour flashes. Press START/STOP to change hour (including AM/PM); hold button to
scan values
5) Press MODE. Minutes flash. Press START/STOP to change minutes
6) Press MODE. Seconds flash. Press START/STOP to set seconds to zero.
7) Press MODE. Year flashes. Press START/STOP to change year.
8) Press MODE. Month flashes. Press START/STOP to change month.
9) Press MODE. Day flashes. Press START/STOP to change day.
10) Press MODE. Date flashes. Press START/STOP to select M-D (month-day) or D-M (day-month) format.
11) Press MODE. Hourly chime setting flashes. Press START/STOP to select ON/OFF. When ON is
selected, watch chimes on every hour.
12) Press MODE. Button beep setting flashes. Press START/STOP to select ON/OFF. When ON is
selected, watch beeps for every button press.
13) Press SET, at any step, when done setting.
Press and hold MODE to switch between 12- and 24-hour time format.
Press SET to view date. Year is at top of display and date is below.
Press RECEIVE to view current city.
Press and hold RECEIVE to begin manual reception of time signal, as described in ATOMIC CLOCK
SYNCHRONIZATION section.

(from the User's manual)

May 03, 2011 | Timex 1440 Prizefighter 53032 Sports...

2 Answers

I just bought this watch but can't figure out how to set: time, date, and alarm. Please help. Thank you


set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Jan 14, 2011 | ESQ 07301132 Aerodyne watch

2 Answers

How do you change the country


Thank you for contacting FixYa.
I would contact ESQ at the following link:

http://www.esqswiss.com/

Best regards. Jewel

Sep 13, 2010 | ESQ 07301132 Aerodyne watch

1 Answer

I have an ESQ Aerodyne and the time set by the


this watch needs to be taken in as this is not proper time telling. has the johnson rod been used yet. if not, do so. if so have it taken in and checked with a caver device.

Jan 01, 2010 | ESQ 07301132 Aerodyne watch

1 Answer

HOW TO SET THE DATE?


That watch is made by Mavado. If you can not find a exact manual, take a look at a few similar Mavado's and apply their Date Setting Processes. I think you will be pleasantly surprised.

Good luck and Merry Christmas

Jim

Dec 21, 2009 | ESQ 07300864 Wrist Watch

1 Answer

Watch doesn't work


It would be difficult to state with certainty, because it wouldn't likely be possible to determine how long the watch was in storage before you received it. Most watches will need batteries between 2-5 years after their manufacture.
Higher-priced watches could easily be that long on the shelf before sale, but I would contact the seller with your complaint. The seller should at least be conscientious enough to ensure the watch is running prior to shipment.

Nov 19, 2009 | ESQ 07301132 Aerodyne watch

2 Answers

Unable to set the date on an ESQ Gentlemen's Quest Big date


pulling the stem to the first click adjusts the date and pulling it farther adjusts the time. pull the stem one click and turn counterclockwise to adjust date. push stem back in after correct date is displayed.

Jan 05, 2009 | ESQ Quest 07100901 Wrist Watch

1 Answer

How do you set time for the ESQ aerodyne watch 07301132 ?


i need to remove links from my sons fossil watch how do you do this?

Dec 25, 2008 | ESQ 07301132 Aerodyne watch

Not finding what you are looking for?
ESQ 07301132  Aerodyne watch Logo

3,129 people viewed this question

Ask a Question

Usually answered in minutes!

Top ESQ Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Arturs Kalnins
Arturs Kalnins

Level 3 Expert

2338 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you an ESQ Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...