Im having problems with my router and I was told that I should reinstall it but I do not have the CD, How can I complete this task without it??

Does this have anything to do with "Problem with Routers"?

You will lose all the settings of your network if you reset Linksys router. If you have active Internet through your router then you will lose the Internet settings. You will need to reconfigure your router from the beginning.
Follow link to setup your Linksys router without CD.

Hello
Here is a link to belkin.

http://en-us-support.belkin.com/app/product/detail/p/5135

As far as using a cd you need to extract it to your pc from the cd then open it up and install it.

Yes you can. I do believe for the Linksys router the username is left blank and the password is 'admin'. Please give this a try.

press the reset button on the back side of the router. hold it down for 30 seconds. You will need a pen or paper clip. release the reset button after 30 seconds. wait for 1 minute. the power light will become solid. Now unplug the power to the router and plug it back in. Wait for 1 minute. this is the standard procedure to reset the linksys router.

You can set up your router without CD / software.

Click here for step by step instructions

You can reinstall the router without the CD. You don't need the CD . you can do it manually. For this you will need to connect the computer to the router and access the router set up. Once you access the router set up then you will be able to change the settings of the router. Who is your ISP, Cable or DSL ? Click Here for step by step solutions

Hello! It is possible to install it without the CD< but not easily >You will need to, On a separate computer, Go to Linksys.com and download the drivers, then just burn them to a CD< or Put them on a flash drive, and install it on the laptop. Unless the laptop has a Ethernet port, then just connected the computer to the linksys router VIA Ethernet to download the drivers.

The CD is actually just a guide in configuring your router. You can still configure/use it even without the setup CD. If you need to reinstall/reconfigure your router, please provide the model number of the router and your Internet service provider (cable or DSL) so I can help you.

hi
im not sure if belkin is providing replacement for lost CDs but here's the link where you can find the manual for your router
http://belkin.httpsvc.vitalstreamcdn.com/belkin_vitalstream_com/support/dl/p74880-d_f5d9230-4_manual.pdf
you can go to page 35 and it'll provide you the steps on how to configure your router without using the setup cd

hope this'll help you and if you have other concern, just ask me.

ciao!

i think driver u have installed is not support cd label print. u go to your vender who provide u printer. or u have better option to upgrade your driver which support cd label print. good luck purushotam