How fix no power on my polaroid TDA-3211C

try link below and press the helpful button

MLT286A Polaroid TV Module power supply MLT286 FXX 321C FXM 3211C

what were you cap values on the power supply thet you replaced?

That indicates a problem with loose inverters or the inverter board itself needing to be replaced.

You can try contacting this guy to see when he will have it instock again: http://www.shopjimmy.com/catalogsearch/result/index/?q=Polaroid+TDA-03211C+&limit=50

http://s807.photobucket.com/home/budm/allalbums

no power scott hdtv

Not worth repairing,just get a seperate DVD player hook to the tv.It very cheap these day.

check the fuse right next to the plug on the set if thats not bad then your power board has bit hte dust
that model has so many differant supplies it is hard to say what diode has gone or wheather it is just a bad puffy capacitor

sounds like inverter board. What it sounds like is happing is your LCD is working ut the backligkt board that allows you to see is kicking off. (as you still have sound) Which could be the (most likely) inverter board, or the power supply board. You can take apart and check for voltage at your power supply. The power supply has a pigtail with large white wires and a connector. Power up with the center back cover off and check your voltage at the white connector on the power supply before and after the screen gos out. If there is no large voltage loss it is your inverter board.

You can used boards on e-bay or
www.rns-systems.com

You can try a hard reset: Unplug TV from AC mains and remove all cables from TV. Wait about 30 minutes and replug to AC power and redo the cabling. Switch on the TV and see if it works..

two options _bad backlight inverter or the main board ;eed to be change.