My mad catz head set won't connect and only flashes blue. what's the problem?

When the afterglow headset flashes from red to blue, it is in pairing state, youve held the power too long after power-on. Shut it off again and turn it back on and dont hold the power button untill it flashes red to blue. The directions provoded with it aare quite easy to follow. Took me 30 seconds to set mine up

The headset's wireless transmitter is malfunctioning. I had the same issue with a Mad Catz headset, and after emailing the company several times I found out their is no way to fix it without purchasing a new one.

I believe there is a signal conflict of frequencies nearby ,where is it that this happens?

Press the K1 button, the one next to the M of MAD CATZ and hold it down for 8, yes Eight seconds.
It should beep twice and the blue LED will flash.

The manual is here just past halfway down the list.

www.madcatz.com/Default.asp?Page=43

Go into your Phone's settings and make sure Bluetooth is turned on and also make sure that your phone and the Mad Catz Bluetooth are in "discoverable" mode which basically means that the phone will show up to other devices and will also discover the Bluetooth Headset and then you should be able to pair them together.

If this doesn't work, you may want to stop in your nearest cell store and see if one of the reps will help you out. I'm sure they'll either get it working for you or at least guide you in the right direction.

I hope this helps :)

-James

The headset wouldn't connect so we deleted it. Then went back and tried to pair it again. And it wont flash blue and red, just blue.

Let's see if we can FixYa!

You may want to review this guide for connecting a bluetooth headset to a PS3:
(Click here)
http://boardsus.playstation.com/playstation/board/message?message.uid=26900460

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!!

it is probably 0000

go to were it says blue tooth on ur ps3 and pres search and on ur mad cats hold down the power button for 10sec.