Posted on Jul 23, 2010

Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I turn the power buttin on....after about five

We were watching the tv and suddenly just lost the picture. We turned the tv off and back on and the power light is blinking red on and off. We unplugged the set for over an hour and plugged it back in...pushed power button...screen comes up blue...then after about five seconds..screen goes black and power light is blinking again Toshiba Colorstream rear projection TP61H60

1 Answer

Chi Chu

Toshiba Master 8,457 Answers
Posted on Jul 23, 2010

Chi Chu

Toshiba Master

Joined: Jul 01, 2009

Answers

8457

Questions

Helped

2822411

Points

26282

When was the projection lamp last change?If the tv,projection lamp inside the tv at last change was 1/ 1/2 or 2 years ago,and the tv is on,an in use at lest 4 or 5 hours day.The projection lamp life,it over should be change the projection lamp.Now tv turn on LED light "LAMP" indication light up or flashes?Yes,the projection is dead,hear alot of clicking too?The Ballast board it also dead,should be change too.The Ballast board,this board job,it help to ignite the projection lamp.

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I have a westinghouse smart tv. ill be watching something and the tv will suddenly have just sound no picture

bad capacitors as a guess .

Read full answer

Dec 17, 2018 • Westinghouse Televison & Video

1helpful

1answer

No picture showing after power on.

If this does not happen with other devices then I would say try a new video cable. HDMI cables can get very picky. If this happens at anytime then the inverter in TV is going out.

Read full answer

Sep 19, 2015 • Panasonic Viera Tc-p65vt30 3d 65 1080p...

0helpful

1answer

Samsung ln46c530 lost picture, now won't turn on. Indicator light turns on solid red when on, flashes five times when shut off

The fault is with its main board itself. Troubleshooting to this board is not an easy work to a user can do. It will be best to contact any service technician. google.com/+GopakumarGopalan

Read full answer

Nov 24, 2013 • Samsung LN46C530 TV

0helpful

1answer

When I turn on my tv the green light gomes on and the picture starts to come up then after about ten to fifteen seconds the tv goes off but the green light stays on, then like one minute later the picture...

The 5 blinks error code means that the lamp driver is faulty. How good are your electronics/soldering skills?

Read full answer

Dec 10, 2010 • Sony KDF-E60A20 60 in. LCD HDTV

0helpful

1answer

I was watching the TV when it suddenly turned off. The audio fom the cable channel was still running on the independent surround audio system and I could change channels on the cable box. The power light...

Your partial resonance power supply IC with IGBT switch is bad. You will have to have tech replace it for about $50.00. The reason why your audio system still runs is because it is not part of your tv.

Read full answer

Sep 04, 2010 • Toshiba Televison & Video

0helpful

1answer

While watching the TV the picture suddenly went out - still have sound. Turning the TV off and on again does not help - the POLAROID Logo displays, but when the station connects - still no picture

possibly external power supply faulty under load it may fail these power supplies ofen have capacitor failure open the power supply to check for leaking/bulging/swollen capacitor is around 2000uf rated at 12v

Read full answer

Apr 28, 2009 • Polaroid FLM-2011 Television

2helpful

1answer

No Picture, No Sound While Watching

Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:

NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.
1. Unplug the TV power cord from the power outlet.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.

LCD TV TroubleshootingThe defective LCD TV may have the following common symptoms:

Symptom: No picture on screen but LCD TV still has sound.
Solutions: The problem is cause by defective inverter. Replacing ivnerter will solve hte problem. Symptom: Screen flash on and off between 1/2 to a few seconds, but power indicate light stays on and TV still has sound.
Solutions: The problem is cause by defective inverter. Symptom: Blue Screen but no picture
Solutions: The problem is cause by defective Main Board(AD Board). In some cases, this problem may cause by the defective Screen Controller board. Thsi board is mounting on teh back of LCD TV Scree. Symptom: Power light stays on but no display and sound
Solutions: The problem is cause by defective Main Board(AD Board) or Power supply board. Symptom: No Power or Power indicate light does not lits
Solutions: The problem could cause either by defective Power supply board or defective Main Board(AD Board). Symptom: Screen is half dim and half bright
Solutions: The problem is cause by defective LCD Panel.It needs to be replace.

Hope it may help you;

Regards;
VOTIT

Read full answer

Jan 29, 2009 • RCA L37WD250 37 in. LCD HDTV

0helpful

1answer