How do i set the date on my oyster perpechual movement watch

I have the same watch 20 years old. I cannot wind this watch.
it is self winding , which is generated by arm or wrist movement.
i purchased a box for times I won't be wearing. Will rotate watch 5 minutes every hour ( belt driven- only use that other winders say gear my experience is belt drive more reliable)
if you have to wind this watch I would question if it is real Rolex.

They don't have battery's ,it is a analogue watch, winding .

this link will help you
Identify Counterfeit Fake Rolex Watches Rolex or Replica Don get Screwed

If you're looking to purchase a watch like this, I suggest you go to RolexForums.com to learn more about this model and find a good source for vintage Rolex watches.

Hi Bob,

Unfortunately, Rolex automatics, like all mechanical watches, must be serviced every 3-5 years. This is because the oils in the movement dry and congeal on the bottom of the wheels (gears) and dust and debris in combination work like sandpaper to cause wear on the parts.

Think of it like a fine automobile, one would never neglect the oil change in their new Mercedes because the engine could be damaged. In this case it is the movement that can have excessive wear. Also, the mainspring at this point may need to be replaced, which is the power source of your movement. We service Rolex and all other high grade watches, and always beat the price of the Rolex service center, their time frame, and can provide discontinued parts where they cannot.

We are happy to service your timepiece at a much better price than that offered. Feel free to contact us through email or phone.

http://www.watchandpen.com/id76.html

Expert watch repair for Rolex Breitling Tag Heuer Movado

I would recommend servicing your timepiece. Analyzing the movement with a timing machine or a physical examination of the movement is the only way to repair this issue. You may find a local Certified Master Horologist, or feel free to send it to our service center, we would be happy to help you!

http://www.watchandpen.com/id76.html

Expert watch repair for Rolex Breitling Tag Heuer Movado

Your calendar wheel is damaged. Unfortunately, it is illegal to own or work on a Rolex replica / fake Rolex as it is a trademark violation. I would suggest purchasing a genuine Rolex as a replacement, as there are generally no identifiable movements, and therefore no identifiable replacement parts for the movement in your timepiece.

Be aware, however, that all automatic and mechanical watches, such as Rolex, must be services regularly, every 3-5 years, for them to last and work properly. Thanks for the rating!

This model Rolex has been manufactured over multiple years, and it is not possible to date your watch based purely on is model number. However, it is possible to date most Rolexes based on their serial numbers, which can be found stamped between the lower lugs (i.e., the lugs below 6:00 on the watch dial). You will need to remove the band from these lugs to read the serial number.

Dating the watch case of a Rolex does not necessarily date the entire watch. It is possible that a movement from another watch was placed into a watch case that is younger or older than the the movement. Like Rolex watch cases, Rolex movements can also be dated by their serial numbers, if this is a concern you have about this particular watch.

This jeweler has put together a nice summary of when Rolex watch models were introduced and which serial numbers are associated with specific years of manufacture. Once you have found your serial number, this should help you date your watch. I have no connection (financial or otherwise) with this web site, but I found the information useful and presented in an easy to understand way.

http://www.bgrayjewelers.com/rolex_information.htm

You can get user instructions for their web site http://www.rolex.com/en#/rolex-watches .

Click on "collection" and then choose your watch from the list (incidentally, I couldn't find "daytona oyster" but "Daytona" and "Oyster"!).

At the bottom of the page you will find "downloads".

Click on this and then on "user guides".

Depending on how old the watch is, It may be quick set or older models are not quick set. In older models you need to unscrew the crown, pull out the crown and rotate the crown to set the time, and in order to set the date rotate the hour hand past 12 twice in order for the date to change. Set the date first and then set the hour and min. For quick set models unscrew the crown and pull it out to the fist click this position you can "quickly" set the date by rotating the crown. Set the date and then pull out the crown to the second position out. Rotate the crown to set the hour and min. Then push the crown back in and screw it down.