I have a KD-R610 and the screen keeps flashing protect mode. I am wondering how I an get it off of protect mode because I don't know what the problem is. Have tried checking the cords and reset the system but nothing works.
Try disconnecting your battery, reconnecting it, and resetting your stereo. If that doesn't work, the constant power (yellow wire) or ignition wire (red wire) may have come in contact with ground or isn't properly connected. Make sure everything is connected properly and try resetting your stereo. If it is still flashing "protect", the unit needs servicing Contact JVC Customer Care Center at: 800-252-5722.
Reset button under faceplate
I had the same problem... There is a little reset button when the faceplate is off. I pushed it and it started working once I put the faceplate back on
15,253 views
Usually answered in minutes!
Protect mode is on. How do I take it off and have my radio work again?
Protect mode is on. How do I turn off protect mode, so the radio will work?
SALUDOS AMIGOS COLEGAS SOLUCION DE JVC PROTECTING SEND SERVICE 1.desconecta la unidad del voltage
2.presiona y sosten simultaneamente los botones de[MENU] y[Skip a track ]la flecha indicadora delantar pista
3.Mientras sostienes presionados [MENU]/[Skip a track ] aplica voltage o conectarlo de nuevo
a.el display te mostrara "DC ERR"
b.si muestra "Chk wiring..." repite los pasos anteriores
4.presiona[Skip a track ];en el display aparece "DC1 ERR"
a.Presiona y sosten [Skip a track] y aparecera "DC1 OK"
5.presiona [delay track] la flecha atrazar y aparecera en el display "DC2"
a.presiona y sosten[delay track] y en el display aparecera "DC2 0"
6.desconecta el votage de nuevo de la unidad
7.remueve la carita
8.conecta de nuevo el voltage
9.presiona el [RESET]
10.reinstala la carita y enciende la unidad
×