Kenmore Oasis HE 27082 Top Load Washer Logo
Posted on Jul 14, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Kenmore Elite Oasis HE Model #110.27087604. My washer had an error code "ld". I removed the hoses from the pump and discovered loose change in the pump that was probably jamming the impeller. I removed the coins and after fishing more coins out 3 more times the washer started giving me a "sd" code. I checked the impeller and there is definite damage to one of the wings but the others are intact. I ran it through another wash and it again stopped this time with no change in the pump. I ran it through a diagnostic test and received and error code of F32. I pressed the same button for 3 more seconds and C0 displayed and the washer started by its self for a short time the display read C1 - C7 then it stopped. I have run it through another wash cycle and everything seems fine, but at the end of the cycle an inch of water remains in the bottom of the plastic tub. Is this normal? And is it normal that a coin should get under the agitator and into the pump?What is error code F32 and what does the C0-C7 codes mean?

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 15,935 Answers
  • Posted on Sep 18, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Dec 21, 2008
Answers
15935
Questions
19
Helped
5034656
Points
35540

Pressure Switch failure - remove the hose at the top of the machine, and blow in it to clear moisture/buildup.
If not - replace the Pressure switch.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ld code. It won't drain. Not the drain pump (I changed) and not clogged pipe.

Whirlpool Cabrio Washer Error Codes & Repair Help

applianceassistant.com/Washer.../Cabrio-Bravo-Oasis-Error-Codes.php
Whirlpool Cabrio Washing Machine Error Code Problems, Diagnostics, ... Cabrio LdError Washer is taking too long to drain water from the washtub

Kenmore Elite Calypso Top Loading Washer - ApplianceBlog

www.applianceblog.com/.../1297-Kenmore-Elite-Calypso-Top-Loading-...

Sep 11, 2005 - 10 posts - ‎5 authors
My washing machine stopped after filling and won't wash, drain or spin. ... and then come up with either LD, FL Or SL code and stop working.

Whirl Pool Cabrio LD Temp fix pt.2 - YouTube

? 2:59
https://www.youtube.com/watch?v=tFBtD2wUj4g
Jun 21, 2009 - Uploaded by liquid131
Whirl Pool Cabrio LD Temp fix pt.2. animal131 ... How to override an error code on the Whirlpool Cabrio washer - Duration: 3:08. Whirlpool ...
0helpful
1answer

I have an kenmore elite oasis he and the washer has a code - LD. If i try to stop and start it, it just hums.

Hello,

The LD means Long drain time...that error code coupled with the hum i believe something is stuck in the drain pump preventing it from turning and that is why its humming

GENE
0helpful
1answer

Kenmore Oasis Washer won't drain. "Ld" code during

Hi

Error code LD means long drain. This error appears when the washer takes more than 5 minutes to pump out the water till point where pressure switch resets. To resolve the issue you'll need to clean the drain hose, inspect if the drain hose is plugged. If the hose is fine, then remove the front kick panel and access the drain pump and filter, if you are unable to find the pump and filter remove the back panel as well and trace the drain hose to the bottom of the tub. There is a drain filter connected with the drain pump. It usually gets clogged, and needs to be cleaned every 6-8 months or so. The drain filter is a small white filter connected to drain pump with a hose. If it still doesn't work then you'll need to check the connections of the drain pump, check the electrical connections with a multimeter. Hope this helps... Please post back for more information.

Daniel
3helpful
1answer

I have an error code that says "LD", what does

The LD stands for Long Drain and it flashes when the water level does not change after the drain pump is on. Check to see if the drain hose or drain pump is clogged or is the drain hose situated too high.
0helpful
1answer

Code

Hi


Thanks for using FixYa. Error Ld means long drain and it flashes when the water level will not change even after the drain pump is on. To resolve this issue you’ll need to check the drain hose and the drain pump for any blockages. Also check if the pump is running fine. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee
0helpful
1answer

Washing machine stops half way thru and flashes code LD?

Long Drain
Ld flashes when the water level does not change after the drain
pump is on.
Is the drain hose clogged?
Is the drain hose height greater than 96′?
Is the pump running? If not, see TEST #7, page 13.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

1helpful
1answer

What does the code Ld mean???

Ld flashes when the water level does not change after the drain pump is on. ? Is the drain hose or the drain pump clogged? ? Is the drain hose height greater than 96′?
1helpful
1answer

Kenmore Oasis is beeping with an error code of Ld

LD code is long drain,one of two things the drain pump is frozen and need to be replaced or there is somthing in the pump.Pull the washer away from the wall a bit and get a bunch of towels.Lean the washer back against the wall towards the middle in the back you will see the pump take it apart and find the clog.

0helpful
1answer

My washer has an error code ld and it wont start or turn off i have to unplug it to turn it off now its stuck on on how do i fix it

"ld" stands for long drain. check the water pump for any obstructed items like coins, hair pins or clothing. the water pump is located in the bottom of machine in right back of stator. remove hoses and clean. also check the air dome located in bottom of basket.
1helpful
1answer

Kenmore elite washer problem

you can use a shop wet vac on the drain hose to **** the rest of the water out then you can remove the hoses to check to see if anything is suct in hoses or pump-,mike
Not finding what you are looking for?

1,517 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...