Have difficulty getting audio to sound.

If you are using surround sound, check your center speaker. Most voice tracks are sent to the center channel

Operating Instructions (English) - Support - Panasonic

service.us.panasonic.com/.../KXTG4731-MUL.PDF

PanasonicJul 15, 2012 - Voice Mail Service. Voice mail service . .... *1 A range extender (KX-TGA405) is supplied in this model. By installing this unit, .... R This product is unable tomake calls when: ..... minutes, an alarm tone starts to sound and the ringer ...... To see the remaining information .... greeting message, the unit plays a.

[PDF]Operating Instructions (English) - FTP Directory Listing

ftp://ftp.panasonic.com/telephone/om/kxtg6632_mul_om.pdf

Panasonic

The output transisters are going on it,

Did you change TVs? I had that issue when I moved the PS3 into the bedroom which didn't have surround sound so I was only getting the front speakers. Reset your sound settings by automatic and it could well work again...

Bought a new unit. The old unit was a surround sound system in which the previous owner removed the speakers. I wasn't aware of the problem but found out that it would not allow it to play on Dolby 5.1...It would only play DVD's on channel 2, therefore no english etc. Thanks for your help!!!

Change your audio setup to stereo. if you are running two speakers

Reinstall the Audio Device driver .

Go to sound menu of dvd player and select Stereo sound and if surround is enabled, disable it.
You can get help from user manual of dvd player.

Hi edwardm1,

If you are only hearing part of the audio from your DVD player, I would suggest you check your audio settings before seeking repairs.

Audio can be encoded to a DVD in several ways. If the audio on the disc is different than the settings on your DVD player, you may not hear all of the audio layers. For example, if your DVD is encoded in 5.1 Surround Sound, but your DVD player is set only to play basic Stereo, you may only hear portions of the audio.

Try accessing the menu on your DVD player, and look for the audio settings. If there is a higher setting available than is currently selected, try a higher audio setting. A higher setting should also be compatible with lower types of audio encoding.

If this does not improve your audio, or if you need help navigating your product menus, I would recommend giving Pioneer's toll-free support line a call at (800) 421-1404.

Thank you,
Jason,
Go Ahead. Use Us.

when unplug it from the main outlet, sometimes it goes to defualt setting. check your audio setting..make sure you set according to the speakers that you have. good luck