Casio te-2400 cash register- making transactions

Manual. Probably Page 33 onwards.

electronic cash register - te-2400

cardtransac.com https://www.cardtransac.com > downloads > TE24... PDF TE-2400 User's Manual ... Congratulations on your selection of a CASIO TE-2400 ... To program the tax calculation status for each department/flat-PLU .

Videos as well

https://www.google.com/search?q=CASIO+TE+2400+cash+and+card+tax+breakdown

..

Don't know where NZTech was or the post but you need to press the CLK# button on the cash register(third key from left on cash register keyboard at top menu, Receipt on/off then CLK# ) and sign in the clerk.
if you have no clerks setup you may have to set up clerk
check user manual
https://manualzz.com/doc/3075262/casio-te-2400-user-s-manual
click on download pdf right hand side of screen
page 86 programming clerk

I have never seen a cash register with a memory for storing monthly receipts. You probably need to upgrade to a computer with a cash register capability that will track your monthly, weekly or daily transactions like the banks have. In California, Dell Computer are used at most of are banks and probably are very user friendly for doing these types of transactions. Then you will also have to check to make sure you get the right software program for your business as well.

NO SALE

What this means is your machine has the Journal-off function activated

check and replace your power supply

Try programming 8 zero's into the cash key in program 3 and program 1.

Address code 27 Digit 10 need to be a 1

Hi. The previous owner just had PLUs linked to the depts that suited them. to link PLUs to depts,
Turn key to Program mode.
3 SUBTOTAL
1166 SUBTOTAL
Now type the PLU number you want to link. E.g if you want to link PLU 6, then press 6 on the number pad (don't press the actual PLU, just type its number on the number pad)
Now press the button marked PLU. It should be near the other function buttons.
Now type the department number to link to. Use two digits. E.g to link to dept 5, type 05 on the number pad.
Press CASH
Press SUBTOTAL
As for NO SALE button, does it actually show the command NO SALE, or NS on the display when you press it? It may have been removed from the keyboard. Does the drawer open when you finish a sale normally?
There is normally a setting in key features for VAT breakdown on the CASH button. Make sure this is set so that it prints the breakdown. Add on means you sell at a tax exclusive price and the tax is added on to that by the register. Add in means you sell at a tax inclusive price and want the register to show how much of it was tax.
Hope this helps. See how you get on.
------------------------------------------------------------------------
If anyone needs a Casio TE2200 or TE-2400 manual, try here: http://the-checkout-tech.com/manuals/cashregisters/Casio4.php

Try this: Turn key to program mode 0 CASH SUBTOTAL 3 SUBTOTAL 0 CASH SUBTOTAL
This should remove the preset amount from the CASH button. Now it should work normally when finishing the sale.
Now turn back to REG mode when entering the price, DO NOT use a decimal, so type 2000 for 20 dollars. Now press a PLU (item) button. SUBTOTAL Type the amount received (NO DECIMAL, so 5000 for 50 dollars) Press CASH Change should be displayed, and drawer open
---------------------------------------------------------------------------------------
If anyone needs a manual for a Casio TE-2400 cash register, go here:
http://the-checkout-tech.com/manuals/cashregisters/Casio4.php