HOE TO FORMAT DATE TRAVELER - Kingston (DTIU3/2GB) 2 GB USB Hard Drive

The simplest way to format a Flash Drive or a Pendrive is to format it from the My Computer without using any commands. Let's assume you are doing it on a Computer (Pc Desktop). Follow the instructions;
1. Connect you Data Traveler on one of the Usb port of your computer, and wait for few minutes.
2. After you know that it's been detected by the computer, open "My Computer" then right-click on the Data Traveler's Drive Icon e.g. Removable Disk (K:), etc.. and select "Format"

Removable Drive



Right-Click on the Removable Drive
3. When the format dialog box is opened, click "Start" and then you'll be prompted with a warning message to confirm the proceed, click "Ok" to proceed. Formatting DialHOE TO FORMAT DATE TRAVELER - bf3d566.jpg/u>


HOE TO FORMAT DATE TRAVELER - d26cc6a.jpgt Warning Message




4. Wait for few seconds and you'll get another message that the drive has been successfully formatted.

If you have problem, please let me know. Good luck.


Thanks for using FixYa.

Yes my flash always pleas insert disk to drive ,please solusion,sen me to emil [email protected] to driver download free,,pleas

Just insert the Date Traveller to a computer. The computer will detect it and it will assign it as a Removable Drive. Right click the assigned drive then click the format. A window will appear, click Quick Format then click Start.
After the reformat, on the taskbar look for the icon with green arrow with an hardware. Double click it then click the button Stop. It will advise you that the hardware is Safe to Remove.
After that, you can now use your Date Traveller.

1)Go to Start
2)Run
3)Type CMD in The Box
4) It Give's You This Window


Write Format f: or e: or g:
Ex : Format ??
Replace The ?? With The Redirection of your flash Disk


Enjoy !

Please Rate ^^