How do i get the child lock off to operate the machine please

Google.com gives the following free manual for a Zone Controller, and not a washing machine.

Unsure if that is what you need to check, as question appears in the Washing Machine repair forum.

Installation manual with no mention of child lock:

https://www.manualslib.com/manual/1252634/Daikin-Brc230z4.html

Operation manual, but unsure how a child lock would appear:

https://www.manualslib.com/manual/674906/Daikin-Brc230z4.html

6.1 Child lock function
This option prevents children to play with the appliance while a programme operates. The programme knob and the touchpads are locked. Only the on/off button is unlocked.

Activating the child lock option
1. Press the on/off button to activate the
appliance.
2. Press and hold touchpads (A) and (D) at the same time until the child lock indicator comes on.
• It is possible to deactivate the child lock option while a programme operates. Press and hold the same touchpads until the child lock indicator goes off.

Dado

To TURN OFF CHILD LOCK on your LG washer, press and hold the CHILD LOCK button for 3 to 5 seconds. The washer should now have CHILD LOCK mode DISABLED and all buttons will function properly.

PLEASE NOTE: ON other newer LG front load washing machines hold the PREWASH/CHILD LOCK button for 3 to 5 seconds to turn CHILD LOCK OFF.

Pressing this button stops operation of other buttons.
"Locking" or "Un-Locking" is repeated whenever pressing the CHILD LOCK button. (For "Locking" or "Un-.Locking" press the "CHILD LOCK" button for 3 secs.)
When 'CHILD LOCK' is activated, pressing the other buttons would not work.
http://electronicshelponline.blogspot.com/

child lock is turned on , controls wont operate if child lock is on (safety)

holding down stop for 30 seconds usually on most models turns off child lock

First of all, here is the direct link to the ONLINE USER'S MANUAL for that model:

http://www.fixya.com/support/p96959-siemens_wfxd8400uc_front_load_washer/manual-4955

To view the Owner's Manual with Operating Instructions just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information at the website indicated or the contents of the Owner's Manual.

You may need ADOBE READER installed on your computer to read PDF documents. You can download this free at WWW.ADOBE.COM if necessary. Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there.

See page 26 and 27 of the ONLINE USER'S MANUAL for detailed instructions on how to operate or disengage the CHILD LOCK.

It states that to disengage the child lock turn the PROGRAM SELECTOR to the desired program to switch on the appliance. Then press the MENU button until CHILD LOCK ON is displayed and the key symbol flashes. Press the SELECT button until CHILD LOCK OFF is displayed. Note, you can only set the child lock on/off before starting a program or in the PAUSE mode only.

Please comment back here to this page if you have any questions, have difficulty accessing the link, or just require further general assistance and I will respond as soon as I see it.

Thank you very much and good luck.

Joe.

It means the Child Lock feature which locks the controls is turned on. Look for the two console buttons, usually adjacent, with the lock and child symbols between them like the one shown below. Press and hold those buttons simultaneously until the CL light turns off to unlock the controls.

Hi there,

You can use the child lock feature in 2 ways.

1. To prevent operation of the washing machine when no wash cycle is running

To set this feature, switch the machine on using the POWER button at the top-left of the control-panel. Next, press and hold both the SPIN and RINSE buttons for about 3 seconds - until the child lock light indicator on the control panel illuminates. All functions of the washing machine will now be disabled apart from POWER ON/OFF until such time as the child lock is deactivated.

To deactivate the child lock, press and hold the SPIN and RINSE buttons again until the child lock light indicator on the control panel goes out.

2. To prevent any tiny fingers from tampering with the machine while a program is running.

After pressing the START/PAUSE button to start the wash cycle, press and hold the SPIN and RINSE buttons until the child lock light indicator illuminates. All buttons on the control panel will now be disabled until the child lock has been disabled. When the wash cycle has finished, you will need to switch the child lock off again to reactivate the buttons. Once you have finished using the washer, reactivate the child lock again before switching the power off as above.

The feature can also be used when using the delayed start feature, but needs to be set after pressing the START/PAUSE button.

Hope this helps. Please let me know if I can be of further assistance.

Regards,
BElectric

hello You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
When the child lock function is activated, the
buttons on the unit are locked and “ ” lights
up in the front panel display. (You can operate
the system by using the remote.)
Note
•When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
the front panel display.
1 Press SYSTEM MENU.
2 Press X/x repeatedly until “CHILD
LOCK” appears in the front panel
display, then press or c.
3 Press X/x to select a setting.
The default setting is underlined.
• “OFF”: Child lock function off.
• “ON”: Child lock function on.
4 Press .
The setting is made.
5 Press SYSTEM MENU.
The system menu turns off.
Tip
• You can activate the child lock function by pressing
x for more than 5 seconds (“ ” lights up in the
front panel display).
To cancel, press x for more than 5 seconds so that
“ ” disappears from the front panel display.
Deactivating the Buttons
on the Unit good luck

shaun

fault code "cl".you have your child lock function on.push the two child lock buttons together on the control panel,hold them for a few seconds till the "cl" icon dissapears