After replacing both ink cartridges an error comes on.

Resolve Canon Printer error E05?

The Canon printer error E05 execute due to the compatibility issue related to ink cartridge installed in the printer. This Error E05 as studies by Canon Printer Support professionals also may execute if the Ink Cartridge is not accurately installed. Further the Ink Cartridge in Canon printers comes with a small opening via which it easily gets the capability to discharge the ink which needs to be utilized on a certain paper. It is needed, when the printer is not at all required for a considerable period of time, and the ink may get easily dried up by blocking the cartridge opening. The Canon printer error E05 is also known to be executed by the disarrangement issue of a cartridge in its holder, or even when the cartridge needs to be replaced. This is considered a common issue but yes, it can easily be resolved.

There are 3 methods to resolve Canon Printer error E05
Method 1: Resetting of the printer

·Turn on the Canon printer first
·Next, Canon Printer Technical Support technicians have suggested users to hold and then press the button for at-least 5 to 6 seconds to enable rebooting process of the printer
·It is now ready to be used by you.
Method 2: This method deals with the reinstalling and clearing of the printer blockage

·Open the lid cover carefully from the rare top of the Canon printer.
·Next, ink cartridge installed in the printer will automatically be visible
·It is needed to press the two "click-locks" key which is located at the sides of the cartridge holder, and then you will see that the ink cartridge will pop-out to be taken off automatically.
·Now, Check the cartridge if it is having any sort of dust particles, or have dried ink in its opening that could be causing the blockage.
·Cleaning of the cartridges is required which is suggested to be done by tissue and then re-install the ink cartridge in its holder.
·If the error still occurs then, one needs to replace the ink cartridge immediately.
Method 3: Replacing of the Ink Cartridge

·Buying an Ink cartridge of the Canon printer from a local electronics retailer is recommended in this method.
·Re-installation of the cartridge is necessary by following the Method1. Come and explore our Canon Printer Customer Support services now and get your issues related to Canon printer resolved. We are available for users all day long by promising them to deliver the utmost solution available with us according to latest market trends.for more Contact on Canon Printer Support Phone Number 1-800-213-8289 for Repair Canon Printer

Canon Printer Support Phone Number 1 8002138289 Tech Support

on ours the cartridges click twice to be fully seated..there are 4 cartridges in this one.. if one is not all the way down, it will error..in extreme cases if all the cartridges are in place..unplug the unit and reboot it..

You may want to try the clean the printhead:

1. Press the Setup button.
2. Select Tools.
3. Select Clean Printhead.

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.


If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K
This error occurs when printer fails detecting ink level or printer assume that no ink in the cartridge. We cannot use print, copy,scan, and fax function before the problem fixed. It's recommended for you to replace ink cartridge. To continue using the printer without replacing the cartridge we must deactivate ink level detection function. Be aware that printing in this condition can damage the printer while sending fax or scan is not problem.

Original source: http://ij-forum.blogspot.com/2008/12/error-message-check-ink-u162u163.html#ixzz2Cpr4Be1K

replace your ink cartridges my be your cartridges are broken..

Check the following information if your printer not printing ink

http://www.fixyourownprinter.com/forums/printer/68130#2

www.fixyourownprinter.com

ERROR CODE CANNON MP150/MP160

E2 - No paper (ASF)
E3 - Paper jam
E4 - No ink
E5 - The ink cartridges are not installed or a non-supported ink cartridge is installed , or the ink cartridges are not installed properly
E8 - Waste ink absorber full, or platen waste ink absorber full «ОК»)
E9 - The connected digital camera / video camera does not support Camera Direct Printing
E14 - The Ink cartridges whose destination are wrong
E15 - Ink cartridge is not installed
E16 - Ink remaining is unknown
E19 - Failed to scan head alignment sheet
E22 - Carriage error
E23 - Paper feed error
E24 - Purge unit error
E25 - ASF(cam) sensor error
E26 - Internal temperature rise error
E27 - Waste ink absorber full or platen waste ink absorber full
E28 - Ink cartridge temperature rise error -
E29 - EEPROM error
E33 - Paper feed position error
E35 - USB Host VBUD over current error - USB
E37 - Abnormal motor driver error
E40 - Other hardware error
E42 - Scanner error

From doing my research, I have found that the 50C Error message comes from the cartridge, usually if it has been refilled. If this cartridge is new, please return it to the place of purchase for a new one or a refund.

Here's what happens when you refill the Dell Series 2 ink cartridges. There is a sensor in them that cannot be reset.

Dell ink cartridges can only be purchased at Staples, Walmart or Dell's website.

Dell ink cartridges have a sensor that reports the ink level as low once it reaches a certain level. The sensor can not be reset. If you refill an ink cartridge that previously reported low ink, it may print fine, but the sensor will always report low ink. Buying or replacing ink cartridges with new Dell cartridges will resolve the low ink message.

Dell discourages ink refills. Refilling ink may lead to print quality problems, and even eventual hardware problems.


if u have not refilled ur cartridge and u still get this error i suggest u buy a new cartridge.....


good luck
have a nice day

Hi there Error 50c
There is lots this happens with the dell printers

Regarding the Dell A940 "Error 50c"....the user guide doesn't seem to mention "Error 50c". They do, however, mention a "Cartridge Error" on page 52 of the manual. They claim this means that the printer has detected a short circuit (fuse/resister) in the cartridge. As you may or may not have noticed in the manual, this is what they recommend doing about it:

1) Press Power to turn the printer off.

2) Lift the printer cover/lid (scanner unit) until the scanner support holds it open.

3) Turn the printer on.
The ink cartridge carrier moves and stops at the loading position unless the printer is busy.

4) Remove the color ink cartridge.

5) Lower the printer (scanner unit) until it is completely closed.
If the error message displays again, replace the black cartridge with a new black cartridge.

If the error message does not display, repeat steps 1–3 and then go to step 6.

6) Reinstall the color cartridge and remove the black ink cartridge.

7) Lower the printer (scanner unit) until it is completely closed.

If the error message displays again, replace the color cartridge with a new
color cartridge.
If there is no error message (indicated by flashing lights), repeat steps 1–3 and then reinstall both ink cartridges.
8) Lower the printer (scanner unit) until it is completely closed.

If you get the error message again, while both cartridges are installed, replace both of the cartridges.

Basically, what they want you to determine is,....if the short circuit is with the "black ink" cartridge or the "color ink" cartridge and then replace the cartridge that has the problem.

You may have to buy a new cartrige.
Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

Hi,

If an ink cartridge is empty, the red error light will remain solid. You can check the status of the of the ink cartridges by looking at the icons on the control panel. Press the down arrow button to scroll down to MORE OPTIONS. The level of ink will be shown on the screen and the ink that will be out will have cross on it.

Please follow the steps below to replace one or more cartridges.

***NOTE***
-You cannot print if any ink cartridge is expended.
-Leave the empty cartridge installed in the printer until you have obtained a replacement.
-To ensure good results on your printouts, we recommend using Genuine Epson Ink cartridges. Epson does not recommend the use of refilled inks or 3rd party ink cartridges.

Once you start the ink cartridge replacement procedure, you must complete all the steps in one session.

1. Make sure the printer is powered on, and not printing.
2. Open the printer cover.
3. Do one of the following:

3a. If the red error light is on (cartridge is empty) press the MAINTENANCE BUTTON.
3b. If the red error light is flashing (cartridge is low) press the MAINTENANCE BUTTON. You will now see the Cartridge Replacement highlighted in Advanced Settings. Select OK.
3c. If the error light is off (outdated cartridge), press the DOWN ARROW MENU button to choose MORE OPTIONS. Press OK, then select INK CARTRIDGE REPLACEMENT.

4. You will now see a message on the display telling you that the ink cartridge replacement will begin. Press OK to continue. The print head will move to the replacement position.
5. Open the cartridge cover. Press in the tab on the back of the cartridge, and lift the cartridge out of the printer. Dispose of it carefully.
6. Unwrap the new ink cartridge. DO NOT touch the green circuit boards, or remove ANY labels.
7. Lower the cartridge into the holder, with the green circuit board facing the front. Gently push the cartridge down until it is firmly seated.
8. If you need to replace another ink cartridge, repeat steps 5-7 above.
9. Close the cartridge cover. Press the front corner of the cartridge cover forward to lock the cover into place.
10. Press OK, and close the printer cover. The printer will begin charging the ink delivery system. Once charging is complete, press OK to finish.