How do I get the top cover off a Simpson Eziloader washing machine model 45S708E ?

Either way around it doesn't matter. Unless it is marked with a P & N or + & - then red would go to P or +

sounds like blocked pump or door latch sensor/switch more likely pump blocked.thats normally first to activate in wash cycle.if unsure seek help to locate and check.it ll be either accessable from bottom front of machine or you may need to tip it up as it ll be at bottom of machine.unplug first,and if you pull pipes off pump to access there will be some water.hold waste pipe as low as itll go to release any water left in machine

check the pump hasn't got something stuck in it

Google the make and model and add the words user manual to the end. There you will see numerous sites that offer either free or inexpensive user manuals that you can order or download. My favorite site is simply manuals.com.

Debbie Elliott, I can't get the sides and top off my dishwasher, how did you do that? Thanks

FIND THE REQUIRED MANUAL ON http://www.myshopping.com.au/SP--102678_SIMPSON_45S710E_7_kg_Front_Load_Washing_Machine

1.Turn off machine 2.unplug from power 3.leave unplugged for 5-10 mins 4.open door (if has water in drain via pump/lint filter (botton right flap). 5.empty contents(if wet turn drum by hand( may be unbalanced) close door) 6. turn on power 7. select colours 40 cycle 8. press start button 9.wait a moment ( chip reset ) 10.hopefully machine will fill with water and let complete cycle

Hi I have a simpson eziloader 5kg Model: 39S500. I've just replaced the drum and put it all together but I have a spring that I'm not sure where abouts it goes can anyone help thank u

The motor controller or ECU is to blame.

Have them checked & replace as necessary.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.