Display screen temp. not matching temp. inside freezer .

No. Sounds like the intern temp sensor is bad, missing, or not connected. 92 is probably the max reading it can display. The unit will probably operate continuously, be much to cold, and cost a ton to operate. I assume you bought this from Sears. Call them to replace the freezer. Should be no problem.

Hello swanee3669 - Have you trying measuring the temperature inside the unit to confirmed that it matches the display? If so, I recommend contacting a professional to accurately diagnose the unit since it sounds like it could possibly have a bad sealed, thermostat or control board.

dear sir/madam

make sure tempreture sensor is on correct position after that restart your freezer if its same problem i mean buzzing temperature alarm then it,s need to change .

hope answer the question

thank you

please vote!

check condensor fan if it has one. if not unit may have sprung a leak some where

Sounds like the temp sensor is bad or intermittant. Check the connections to the display to see if they are loose. If not, the sensor might be bad, causing it to read the wrong temp. The fact that it is jumping around like that points to this kind of problem.

Hello derek143

You Said,
I have a Whirlpool upright freezer AFG 371/H there is a digital display and lights and buttons, on/off temp alarm etc running across the top of the freezer. None of this works but the freezer is still freezing. i have no idea what the temp is.

I think you should try unplugging it for 5 minutes and then try restarting it and see if it reset.

You should get a thermometer to be sure the temp is what it should be. With out it is very hard to tell correct temp.

you have a bad control or bad sensor

you have a refrigeration issue partner let her go 16 yrs. is good service you can replace it for 3 to 5 hundred the repair will be that IF you can find someone with the r-12. don't go for a top it off and go deal the food you lose is to expensive for that to be economical.