Where can i get a new battery/charger 9.6v for my

are you sure the battery is fully charged the light on the charger
should shine brightly but you might of overcharged it if you have had it on for 90 mins

i want to know where to buy a charger fo rmy new bright 19.2v nicd battery pack

You can change the crystals over in the car & transformer,problem is that they may be soldered into position & would need to be unoldered & new ones soldered in. Can get them of of ebay pretty cheap. Should say what frequancy car is on underneath & on box. Some controllers have a switch & can choose out of 3 frequncies.Hope this helps on deciding to go further.

OK that is a malfunction in manufacturing that happened to my first one send it back with a note explaining what doesnt work they will send you a new one back and if your nice to them sometimes a complmentary item from visual land

the battery isnt lasting because it needs to be fully discharged (drained) before it is recharged. (this is only for nicd batteries)

STU DO YOU HAVE THE DIMENSION OF THE PART IF YOUR NEW BRIGHT TOY 4X4 DO YOU HACE THE ONE PICTURE OF THE PART YOU ARE SEARCHING TO SEE IF I HAVE ONE!

What is the orange charging light doing? If it is just flashing on, or only staying on or a minuet, that means you need a new battery. The orange light foes on when the battery has been charged to its maximum capacity. After each charge, the capacity is decreased. So if the orange light is on for only a short time, get a new battery.

I have purchased 2 remote controlled toy cars from Costco over the years. These New Bright batteris and charges last only a few charges, and then they go bad. I am disappointed. I will go to Walmart and buy a new battery and see if it works better, if not, i will return to Walmart.

Don't throw away any NiCd power tool battery, Firestorm or Versapakbattery that does not hold a charge or does not give you the power youneed, you can get new life from your battery or device that containsNiCd batteries. icad batteries often die in such a way that they won't take a chargeand have zero voltage. This usually means they are shorted out bycrystal dendrite growth. You Can fix these shorted crystal dendrites by"Revitalization through Vaporization of Dendrites (RVD) Process".
You can get this guide from here