Belkin (F5D7230-4) Router (587009) Logo
Posted on Jul 04, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Firmware Boot Loader / Tiny Kernel Version: // document.write(''+boot_code_version+''); document.write(boot_code_version); // document.write('123224'); V1.11.0 This tool allows you to upgrade the gateway's system firmware using a file provided by the vendor. Enter the path and name of the upgrade file then click the APPLY button below. You will be prompted to confirm the upgrade.

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Novelist:

An expert who has written 50 answers of more than 400 characters.

  • Expert 157 Answers
  • Posted on Jul 10, 2010
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Novelist:

An expert who has written 50 answers of more than 400 characters.

Joined: Mar 21, 2009
Answers
157
Questions
1
Helped
73153
Points
393

Hello jagancs1,

The Belkin Router's software (firmware) can be occasionally updated. To check for new updates, go to the Belkin Router Setup page http://192.168.2.1/ . The following choices will appear to update firmware and save current settings:

•Select Firmware Update (Near the bottom of the left-hand panel)
From time to time, Belkin may release new versions of the Router's firmware. Firmware updates contain improvements and fixes to problems that may have existed. Click the link below to see if there is a new firmware update available for this Router.
•Firmware update Options:
Firmware Version > #.##.##
Check for New Firmware Version > [Check Firmware]
Update Firmware > [Enter file name/Browse]
[Update]

•NOTE: Please backup your current settings before updating to a new version of firmware. Click Here -> http://192.168.2.1/system_c.stm to go to the Save/Backup current settings page.
•Save/Backup Settings
You can save your current configuration by using this feature. Saving your configuration will allow you to restore it later if your settings are lost or changed. It is recommended that you backup your current configuration before performing a firmware update.
*Saved File name is user.conf*

If this solution is helpful please click a thumbs-up rating below.

Have a great day,
martyshaw152

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Cant download Boot Loader / Tiny Kernel Version: V0.02

Routers don't use kernel.Are you mean recover a Linux OS recover?
tip

PSP Firmware 3.71M33-2 Diagram installation.

This article will explain a diagram of PSP CFw 3.71 installation. I have provided this document as a guide to helps PSP Users get started for installation CFw 3.71M33-2 with 1.50 kernel Addon2 on both PSP, Fat and Slims. here's a simple steps to find out.

3037c07.jpg

Q:How do I know what version of the firmware I have?
A:Follow this, <b>Version check :</b> Go to the PSP Menu and move across to the "Settings Menu". Scroll down, select to "System Settings" >> "System Information" and you should see version of your PSP.

Q:How do I boot into "Recovery Mode",?
A:Do a full turn off (hold power button >5sec) and hold the "R-trigger" while turn on the psp.

Q:How do I know what kernel of game folder configured.?
A:Do this via "Recovery Mode" >> "Configuration" >> "game folder homebrew (currently: 3.xx kernel)"

Q:How do I activated the plugin No-UMD of CFw M33.?
A:Do this via "Recovery Mode" >> "Configuration" >> "UMD Mode" >> Select currently : "M33 Driver - No UMD". Any 4 option umd mode you can select, we recommended to select "Sony NP9660" for most games compatibles.

Q:I getting a blank screen/BSOD when booting my PSP, after downgrading my psp with pandora's?
A:Press "Bright" button on PSP, You will get a message for telling You to press "Circle" (O). Do it, and reenter your settings. Reboot your PSP if necessary.

Source : http://e-arena.blogspot.com/2007/11/psp-firmware-371m33-2-diagram.html

Hopefully this helps..!
3helpful
1answer

Boot Loader / Tiny Kernel Version: V0.02

Did you mean to recover a Linux OS.Routers don,t use kernerls.
0helpful
1answer

Resolve Error Code: C7 on SuperMicro Server

First check the OS compatibility for you motherboard here:
http://www.supermicro.com/support/faqs/os.cfm

Then, if compatible, check the IDE/SATA setting. Change the hard drive controller settings from IDE to AHCI or vice versa to see if the OS kernel panics on boot. If that does not work, please reply with your OS version and motherboard model.
1helpful
1answer

What folder is reboot in

  • Power is turned on.
  • Open Firmware code is executed.
  • Hardware information is collected and hardware is initialized.
  • Something (usually the OS, but also things like the Apple Hardware Test, etc.) is selected to boot. The user may be prompted to select what to boot.
  • Control passes to /System/Library/CoreServices/BootX, the boot loader. BootX loads the kernel and also draws the OS badges, if any.
  • BootX tries to load a previously cached list of device drivers (created/updated by /usr/sbin/kextcache). Such a cache is of the type mkext and contains the info dictionaries and binary files for multiple kernel extensions. Note that if the mkext cache is corrupt or missing, BootX would look in /System/Library/Extensions for extensions that are needed in the current scenario (as determined by the value of the OSBundleRequired property in the Info.plist file of the extension's bundle.
  • The init routine of the kernel is executed. The root device of the booting system is determined. At this point, Open Firmware is not accessible any more.
  • Various Mach/BSD data structures are initialized by the kernel.
  • The I/O Kit is initialized.
  • The kernel starts /sbin/mach_init, the Mach service naming (bootstrap) daemon. mach_init maintains mappings between service names and the Mach ports that provide access to those services.
0helpful
2answers

Boot loader?

my phone now desaper all menu
3helpful
1answer

Boot loader issue

you have entered the boot loader program by pressing*# and end call button i belive to continue just press the red button again
0helpful
1answer

Acer Aspire 4720 RHEL4 Installation

again install linux in between the installation there will be option select linux boot loader , and one more think linux partition space should more then windows partition
0helpful
1answer

Unable to Install Red Hat Linux Enterprises 4

when the time of installing only you have to take linux boot loader then it will show both operating systems otherwise i think the problem is monitor configuration in linux installing
0helpful
1answer

Problem with motorola razr v3

you hav a software problem that can only be solved by reflashing with a proper v3r firmware that matches with r4515 software version
Not finding what you are looking for?

5,239 views

Ask a Question

Usually answered in minutes!

Top Belkin Computers & Internet Experts

ExpressFiX
ExpressFiX

Level 2 Expert

691 Answers

Brad Brown

Level 3 Expert

19187 Answers

Alexander

Level 2 Expert

171 Answers

Are you a Belkin Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...