Canon printer mp160 error msg 16 (e16) after replace catridge

You can use HIGH YIELD or standar cartrigde

standard
Cartrigde PG-40 black
CL-41 is color

Cartridge Yield: High capacity

PG-50 Black
CL-51 color

The Canon PIXMA MP160 uses the FINE Cartridges: PG-40 Black, CL-41 Color and CL-51. The only difference is the CL-51 is Hi-Capacity. I have included the link to the support portion of the Canon site so you can see what is available for supplies and if your need help in the future with your printer.

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp160#SuppliesAndAccessories

Cannon CL 41 or cannon CL 51 for color
Cannon PG40 or cannon PG 50 for black

press and hold resume button 5-10 second

The following cartridges are compatible with Canon MP160:

Canon PG 40 Black Ink Cartridge Black Ink Cartridge

Canon PG 50 High Capacity Black Ink Cartridge
Black FINE Cartridge, High Capacity

Canon CL 41 Tri Color Ink Cartridge
1 Cartridge of Cyan, Magenta, and Yellow

Canon CL 51 High Capacity Color Ink Cartridge
Color FINE Cartridge, High Capacity

E16 – The ink level cannot be correctly recognized or detected.
How to correct, fix: A used ink cartridge may be installed, or the ink cartridge is empty. Press the <Black> or <Color> button, to clear the error and continue printing without replacing the ink cartridge. However, the remaining ink amount cannot be detected properly, so the function to detect the remaining ink amount does not operate.

these are the cartridges used in 1300

CL-41 FINE Colour Cartridge
PG-40 FINE Black Cartridge
click here for cl 41 prices
http://www.google.com/products?q=cl-41

Click here for pg-40 prices
http://www.google.com/products?q=pg-40



Let me know if you need anything else.
Thanks,
Ekse

repleace color

Step 1 : Push Power switch by continue (Tekan Power On/Off)
Step 2 : inserrt plug(Masukan Power, Power Tetap di Tekan)
step 3 : Tekan Tombol Reset 1x, lepaskan Tombol Pwr, Tekan Reset dua kali lagi Sampai Menjadi 0 (tekan tombol tanpa jeda)
Step 4 : Push + display change from 0 to 1 (tekan tombol + untuk merubah 0 ke 1)
Step 5 : Push Power switch again , Printer will be print 1 page(tekan tombol power –> tombol start sampai ngeprint 1 hal.)
step 6 : Open cover (buka tutup printer)
Step 7 : Unplug (cabut kabel power)
Step 8 : Take out ink 40 and 41(lepaskan catridge 40 dan 41)
Step 9 : Insert plug again (pasang kabel power)
Step 10 : Push power switch (tekan tombol power)
Step 11 : Open cover (scan cover) (buka tutup scaner)
Step 12 : Inksert ink 40 , 41 again (masukan catridge 40 dan 41)

hi dear

this the error code
E9 The connected digital camera / video camera does not support Camera
Direct Printing
E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 Failed to scan head alignment sheet
E22 Carriage error
E23 Paper feed error
E24 Purge unit error
E25 ASF(cam) sensor error
E26 Internal temperature rise error
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E29 EEPROM error
E33 Paper feed position error
E35 15 USB Host VBUD overcurrent error - USB
E37 17 Abnormal motor driver error
E40 20 Other hardware error
E42 22 Scanner error
E2-2 No paper (ASF)
E3-3 Paper jam
E4 No ink
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly
E8 Waste ink absorber full, or platen waste ink absorber full




First, download the software at http://www.box.net/shared/4yblbn34kg

Secondly, to run the software your printer has to be in service mode. Do that by
- unplug cable
- press and hold "power" button
- plug cable
- press "resume" and release
- release the "power" button
At this stage, your computer will detect a new hardware

Run the software.

oke