Problems with Xitel INport Audio

Xitel INport - CFB Software

https://www.cfbsoftware.com > Windows10 > INport

Configuring Xitel's INport for use with LP Recorder on Windows 10. Before you start. Check which version of LP Recorder you have by selecting About from the ...

The software (LP recorder) does not recognise your soundcard. Download a different free program to record your LPs.

The directions for using the Xitel Inport Deluxe under Win7 are the same as those for using the device with Vista. The drivers are built into the OS. You will need to set the audio input to the Xitel device. For most installs of Windows 7 (Aero capable), with the Inport Deluxe plugged into a USB port on the computer, click Start > Control Panel > Hardware and Sound. Under the Sound listing, click on Manage Audio Devices. In the Recording tab, right click on Microphone Input and select Disable. Right click on the Line INport and select Enable. Right click again on Line INPort and make this the default device. Click on the Playback tab and right click on Speakers INport and select Disable.
If Aero isn't available, it's Control Panel > Sound.

You can use any recording software that runs under your version of Windows 7. The LP Recorder software manual starts on page 8 of the Xitel Inport Deluxe manual. If you do not have the original disc, LP Recorder is available here: http://www.cfbsoftware.com/lprecorder/lprecorder.aspx . (Audacity, http://audacity.sourceforge.net/ , works much the same way as LP Recorder. However the drop down menus for the source and output are available from the main program with the default toolbars enabled.)


I hope this helps.

Cindy Wells

I think you need to install the included recording software. It does everything for you.

Try ZyXEL Support

to eliminate the 20 seconds issue, uncheck the auto stop box...this was causing me problems and has been resolved since the box was unchecked.

The Xitel site http://www.xitel.com/USA/support_inport.htm says when this happens, " 1. Go to START -> CONTROL PANEL -> SOUNDS AND MULTIMEDIA PROPERTIES -> AUDIO TAB
2. Make sure that in the Audio tab your soundcard appears as the Preferred Playback device with USB Audio or INport as the Preferred Recording Device. There should also be a check next to the option 'use only preferred device'.
3. When you start LPRecorder you should also make sure that Recording Device is set to USB Device or INport and Playback Device is set as your soundcard and that there is a check next to the option Simultaneous Playback."

Change your recording device in your control panel back to your soundcard that will allow the sound back to your computer. In order to record you had to change it to Inport.

Try the solution at the Xitel site http://www.xitel.com/USA/support_inport.htm