How can i unlock my secourity code - LG KG800 Cellular Phone

If it is like my mtd you adjust it by putting the bar in the hole and secourity it with xa push pin

Please try use the default 0000 0r 1234 code if not use means You can use the code get from the service provider.

you may visit some nokia mobile sites.......

1st You download Webcam Driver.
J'AI PERDU LE CD ...AU SECOURS
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Try 0000 or 1234 or 3106

reinstall the siftware of N73....from nokia webside by using nokia software installer

All nokia mobiles defalt code is "12345". u can try it

12345-The standard code
or If it is changed by you,contact to NOKIA CARE

Press *#7780# the phone will reset to factory settings but remember to back up your phone #'s the code should be the default one!

1) If you have locked the SIM, and forgot the password, after trying it wrong for 5 times, it will ask for PAK-1 or PAK-2 code.
These codes are generally written in the packet that comes with the SIM-CARD.
If you can not find the PAK-1/2 for SIM Card, please contact Hepdesk over phone and they will provide you.
Again, if you enter PAK-1/2 key wrong three times, your SIM will be blocked and you have to take a new SIM-CARD (you will get the same number) for which your service provider may charge you 2$ to 4$.


2) If you have blocked your Handset with Security code, and forgot the password, take it to service center and it can be easily flashed by them.