What does the auto talk function serve on the phone?

Standby Mode deactivates the beater and keep the ice cream cold. When you come off Standby, the ice cream warms a little and the beater starts. You can be in standby Mode as long as you like, It keep the ice cream mix in peak condition. There will be a short delay in serving the next customer.

Standby (US and Canada Only) During long no-sale periods it becomes necessary to warm product in the freezing cylinder to approximately 35°F to 40°F (1.7°C to 4.4°C) to prevent overbeating and product breakdown. When the STANDBY button is pressed, the light comes on, indicating the cylinder temperature retention system (CTR) has been activated. In the Standby mode, the Wash, Pump, and Auto functions are automatically canceled. The Mix Ref function is automatically locked in to maintain the mix in the cabinet. To resume normal operation, press the AUTO button. When the machine cycles off, product in the freezing cylinder will be at serving viscosity.

Manual

https://www.taylor-company.com/assets/pdfs/downloadables/8752_8756_8757op0.pdf

..

On a Camera the letter S generally represents Shutter Priority. A function that allows the operator to manually choose the shutter speed while keeping the other camera settings on auto.

Hi Beth see page 5 of the Manual if this is indeed the model or it is similar. The Up and down arrows have dual functions. When call is active they serve as audio volume. When not on call it serves as ringer volume adjusment. Hope this helps http://www.uniden.com/content/ebiz/uniden/resources/ownersmanuals/D1760om.pdf

If you are talking about a heater.... ???

The ignitor will ignite the raw fuel that will start to heat: water, area, etc.

The Control Panel is the portion of your appliance that will have buttons & knobs to adjust temperature, jets, mode, lights, etc.

I'm assuming you're talking about the directory. When you enter a number/letter, the "Mute" button serves as a backspace/delete function. So what I did was go to Menu>Directory>Review, scroll to the contact I wanted to delete, and press "Mute", which asks me to confirm to delete the contact. Hope this helps.

press the function button (lower left) arrow down to i"Initial Settings" , arrow right, arrow down to "Auto Talk" arrow down to "off" press "Save"

yes it should be on every time rate me

increase the volume while you are talking on phone call. You can increase the volume by press silver FM button. To reduce the volume use silver MP3 button.

You need to configure your microphone settings.
When you open Skype click on Tools - Options - Audio Settings and click on Microphone and select the microphone you are using and save the setting.
I don't know the audio/microphone setting for Phone Serve.

only thing i can think is the IP function might be on. ( and of course, u do have the caller id through the phone company activated, right,,,,just checkin) . this funtion is not available in the USA. to turn it off, press SET/SAVE, press UP to select SET 4 AUTO IP, press SET/SAVE to select, press UP to turn on and off, then press SET/SAVE to confirm. hit DELETE to return to main screen. hope that helps.
tammy