Need passkey to connect motorola h350 to my new phone

Hi,
To turn on Bluetooth and connect a Bluetooth hands-free headset or car kit:

1. On the Home screen, press the Menu key.
2. Touch Settings
3. Touch Wireless & networks
4. Touch Bluetooth to turn it On
5. Touch Bluetooth settings
6. Touch Scan for devices (make sure your headset is in pairing mode).
7. Your phone scans for available Bluetooth devices
8. Touch the Bluetooth device to select it
9. Type the PIN if needed (PIN is usually 0000, or 1234)
10. Touch the device name again to connect to it.

passkey is of ur choice..
only remember that it must b same on both..
it can consist of a single digit to 4/6/8 digit(s)..
eg: if i u type '0' as ur passkey at ur bluetooth tp..u gotta give '0' to ur ph also..

very easy..
try to seek professional advice of ur system admin/vendor....

Hello there

The universal pass key that all of these leave the factory with is 0000 (four zeros).

Hope this helps, please don't forget to rate me.

Thanks

all default passkeys for all headsets is 0000

Pin or pass code should be 0000.

i just did this exactly with a motorola h350. . .the passkey is 0000 after u enter it its gonna register and say complete =)

the default passcode is 0000. I hope that helps.

need new passkey for got mine

Not being cheeky buddy but I have the same pairing are you tapping in "0000". Also go into settings and headphone or carsettings and set to auto answer. Hope this helps M8

Hi, follow the steps to get your product paired. Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset With the headset power off, press and hold the Call button for 6 to 10 seconds until the blue indicator light turns on and remains steadily lit. (The light will flash while you hold the Call button.) If the indicator light is flashing or does not remain steadily lit, turn off the headset and repeat step above. Step B - SET THE PHONE TO LOOK FOR YOUR HEADSET Select (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists all Bluetooth devices it finds. Select Motorola H350. Press OK or Yes to pair (link) the handsfree device. Enter the passkey 0000 and press OK. Note: Passkey cannot be changed from 0000. When your headset is successfully paired with your phone, the blue indicator light changes from steadily lit to flashing. additional help http://www.motorola.com/mdirect/manuals/QG-H300_9495A08A.pdf all the best sreejith 2 Step A - PUT HEADSET IN PAIRING MODE Note: To turn off headset