Don't have manual, can't get juicer blade off to clean

You need to rinse the juicer parts as soon as you finish juicing.
Here's some Juice Recipes For Healing
Here's the manual to help you take it apart-
Jack Lalanne Power Juicer manual

I did some research here on Fixya and this is what another expert had to say.........pull the metal bar forward and down to open up into the blade compartment. your juicer should have come with a handle type key wrench thing that you stick on top of the blades into holes to unscrew blade holder, while unscrewing that hold the blade still.
Hope this helps you......best wishes.

I looked all over for the disassembly instructions for the JM300 to no avail...so I got a flathead screwdriver and decided I'd either get the darned blade out or break it for good. It took some prying but the blade popped out and it was the RIGHT way to handle it after all. Now everything is clean and ready to use again.

the blade can be removed possibly with your hands, if you can manage to turn it, if not then find something that will fit into those little holes of the blade to turn it, and then take it apart, but remember in what order. to put it together: the grey thing with the spout attached goes on first, then the orange basket, then the blade, but don't turn it too tight, just look for the indicator marks and line them up with the arrows, then the black lid, and then the pulp basket.make sure that the black lid in the back, goes INTO the pulp collector, it is not very far, but if it is not done like this, then your machine will not work. then you raise and lock the bar into place and put the pusher into the feeding tube. hope that helps.

Just find a big wire around 1/8 diameter. Bend it and insert both ends on the blade holes. Cover the sharp blade with cloth or use leather gloves.

I just posted this info on an earlier question.


Here's the link to the owner's manual (PDF) you can save or print.
http://www.powerjuicer.com/pdf/express.pdf

FROM THE TABLE OF CONTENTS
Important Safety Information
Helpful Hints
Parts List
Assembly
Disassembly
Cleaning Your Juicer
Troubleshooting

Visit www.powerjuicer.com and find a replacement part.

Am currently looking for a spare part for mine. If I fail to find it, u can have my grater bit!!

ok so i am tryin to take apart my juicer to clean it but i can't find a way to do it. Can u help me?

i had the same problem and figured out an easy way to open it without the tool. DO NOT take out the screws. I simply used chop sticks. I put one in each small hole and held the chop sticks in an X and turned the top counterclockwise!